Kawasaki Sportsbike Riders Club - Australia - Online Forum

Enjoy while it last I thought it was just last week that Reefton and GOR was 100 [emoji14]

Now this piece of road between gembrook and launching place... every guy and his R1 goes there every weekend it won't be long before they put up 70 sign it's so inevitable and that's why I go round these ...

From memory the tank breather outlet is at the rear of the tank, it has a hose that can be pinched easily if you are not careful putting it on. All I can suggest is lightly blowing compressed air up through that hose/fitting with the cap open and seeing if it is clear.
Another thing to check is the ...

The clutch baskets on them always chatter. When I had one I rang a few dealers and they said it's normal on them and every one I have seen has done it.
If you are that concerned you can take the side cover off and have a look at the basket fingers and see if they are damaged, but if the clutch works ...

Sometimes they can work again if you give it a light tap and wiggle...happened to mine but then failed again not long after.

If you have an aftermarket exhaust, might be worth getting a servo eliminator....if not may have to replace servo (providing the fuses are alright, etc.

Apparently all of the later ZX-6R rear shocks fit right on as a straight swap and are a ton better than the 03-04 model. As matchan noted his bike runs wide maybe that to do with the stock rear shock?
I have a 06 zx6 rear shock that i no longer need if anyone wants (free if pickup, postage to be ...

I have a contour roam 2 which I picked up second hand for about $200. I mainly use it for the dirt bike, but it had a good video and very easy to use and doesn't stick out stupidly like the go-pro's. the other one I was looking at is the drifts, they seem quite cheap and are a decent camera.

Either http://www.dirtbikeworld.net/forum/index.php and/or http://www.dirtriderz.com have good people, information and rides.

Hi all, I'm looking at putting a yoshimora exhaust on my 1991 zzr250 my question is should I stick with the dual exhaust or convert into 1? Also will the bike need to be retuned or can I just install the exhaust and go for a ride?
Cheers all
Braden
Tbh save your money for some better gear ...

Welcome

Welcome and all the best

good work

Congratulations

Got the mechanic to tighten the clutch hub nut to spec and I was getting so excited to put it all back together and ride in a few days....then the mechanic says "youre so close to 48k kms you may aswell do the shims now while the engine it out".

Dammit hes right. So looks like im doing that as ...

rooster wrote:http://www.anglican.org.au/
Try this one

Lol, but only if its a carbon bible!!!
thanks for all the replies, I have contacted a few and going to get them fixed next week!!

Cheers for that, I will give them a call today.
now on to the carbon bible search!!