Kawasaki Sportsbike Riders Club - Australia - Online Forum

Sorry for the delay, out of the country again... paid now.

Cheers

G'day again, Can i please order
4 x Caps
1x sling bag

And can you tell me when/if there will be another polo shirt order going in?

Thanks

I second the #3 big end bearing, i have done 2 engines !!! also cracked a head... The alternator chain tensioner can fail with the plastic coating stuff breaking up and filling the oil screen with bits, easy fix though. if you are racing/track daying i would recomend pulling the engine, fitting new ...

g'day mate, what are you doing with your old calipers and discs? i am fitting up a ZZR 1100 front end to my Katana. so far have the forks mated to GSXR triple clamps, the spacing is just right and i dummy fitted my ZX7 race bike wheel and disc with no problems at all. i do however require discs and ...

G'day, not purchased before but would like to order 2x 3XL and 1 x Medium all with no user name.
Cheers

either way it sounds like it will not fetch you much cash. fyi i purchased a ZX7R with 70k for $2000 it had a slightly noisy cam chain and thats it. clean it and polish it up as much as you can, get it ridable and get rid of any rattles, vibrating bits etc. you never know your luck. if you don't ...

Before you replace the pump do the check i stated earlier, this is easy to carry out and will tell you straight away if your pump is stuffed. as it is only a 2psi switch in the pump you will have to disconnect the fuel line from the pump to the carbs. If the carbs are fully primed already the pump ...

rimula X for me as well, have used it for years in everything, road racing ZX7/9.5, My KTM 525 that has done 3 finkes (top 50), Kamfari (2nd in old farts), 4,6 and12 hour enduros, and 2 Simpson crossings without ever comming apart, even for rings!!! Also use it in the Triumph and both cars. best to ...

Hmmm, i have the same model.... maybe you should remove the fuel line to your carbs and try it again. the pump should run, if you put your finger over the hose with the pump running the pump should stop when 2psi is reached. if the pump does not run with the hose diconnected your pump is stuffed and ...

all of the above but with a 950 engine sloted in. MMMMMM torquy fun!!!!

If all else fails a quick squirt of start ya bastard down the ram air intakes will work a treat.....

Not sure if this will work on your model, worth a shot anyway, have the bike in gear and hold the starter on. the starter should not turn as the bike is in gear, however the fuel pump should run as it recieves power when the starter button is depressed regardless of the gear cutout switch. this will ...

Sounds like a broken pin on the selector drum to me. On the earlier models this was behind a cover that was behind the front sprocket, not sure on the later models though. was an easy fix on mine without engine splitting.