Help needed - URGENTLY - [Sydney/Wollongong]

General Discussion
Post Reply
User avatar
fezzick
KSRC Member
KSRC Member
Posts: 369
Joined: Tue Nov 17, 2009 8:41 am
Bike: Z1000
State: New South Wales
Location: Wollongong, NSW
Contact:

Help needed - URGENTLY - [Sydney/Wollongong]

Post by fezzick »

Tomorrow I have to take the Shadowfax from Wollongong to Sydney so that Kent can fit new brackets and stuff to the frame for the seat/tank/fairing unit. Unfortunately, my "wheel" man has been unable to finish and deliver my wheels. The bikes needs to be on wheels and tyres so that Kent can move it around and also judge the line of the bike and how the fairing/seat/tank will fit.

SO, what I need, like today, if possible, or maybe early tomorrow, is a set of 18" wheels, with tyres, that I can BORROW so we can get the bike to Sydney on the trailer and Kent can start work on it. I know this is asking a lot and I know it's late notice, but I'm really between a rock and a hard place here.

Any help would be appreciated.

Phil 0413 626 660

Thanks again.
I started out with nothing and I still have most of it left. Phil
www.halfofmylife.com
User avatar
Wattie
VIP MEMBER
VIP MEMBER
Posts: 10041
Joined: Mon Oct 31, 2005 12:23 pm
Bike: ZX10R
State: New South Wales
Location: Bligh Park

Help needed - URGENTLY - [Sydney/Wollongong]

Post by Wattie »

I'm towing an emtpy horse float from nowra to syd tonight...

Any help?
Wattie #55
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
User avatar
fezzick
KSRC Member
KSRC Member
Posts: 369
Joined: Tue Nov 17, 2009 8:41 am
Bike: Z1000
State: New South Wales
Location: Wollongong, NSW
Contact:

Re: Help needed - URGENTLY - [Sydney/Wollongong]

Post by fezzick »

Thanks for the offer, mate, but not really. I can't deliver the bike to Kent until tomorrow and I really need to talk to him too. Getting it up there isn't the issue. Getting it onto a set of wheels, is.
I started out with nothing and I still have most of it left. Phil
www.halfofmylife.com
User avatar
MAXUMIS
KSRC Contributor
KSRC Contributor
Posts: 1034
Joined: Fri Jul 09, 2010 7:16 pm
Bike: ZX12R
State: New South Wales

Re: Help needed - URGENTLY - [Sydney/Wollongong]

Post by MAXUMIS »

Mate i do have a set of zx12 wheels that 'might' at least get it rolling.
life starts at 200 kph!
User avatar
fezzick
KSRC Member
KSRC Member
Posts: 369
Joined: Tue Nov 17, 2009 8:41 am
Bike: Z1000
State: New South Wales
Location: Wollongong, NSW
Contact:

Re: Help needed - URGENTLY - [Sydney/Wollongong]

Post by fezzick »

Thanks, mate, but they would be too wide, the bike only has little narrow 18" ones. I'm going to take the chassis up tomorrow and then have a look at the wreckers at Alexandria and see if I can buy any set that will fir just so Kent can roll it around.
I started out with nothing and I still have most of it left. Phil
www.halfofmylife.com
Post Reply