ZRX prices

[Gosling1]

hmmmm enough of that......

[yzr750]

that is uncannily true

I wonder if a 12R motor would fit into a ZRX chassis ???

There are a few tidy looking busa engined rex's getting round, so I can't see any reason a 12r motor couldn't be 'made to fit'.

[Nelso]

ZZR1200 engines drop straight in when you put a ZRX head on it. Mind you, they are getting 180HP out of the ZRX engines with the high comp 1224 kits with Yosh grind cams. I so want to do that to mine.

[Nelso]

puff it

There are a few turboed ZRX's in the US and they are getting 240HP out of them. If you were going to fit a turbo, there is no need to swap engines first. I so want to do this as well! but the idea scares the shit out of me

[born green]

puff it

There are a few turboed ZRX's in the US and they are getting 240HP out of them. If you were going to fit a turbo, there is no need to swap engines first. I so want to do this as well! but the idea scares the shit out of me

Hear u.. i came very close to wacking a turbo on my 03 Z1000.. but the cost to do it right...$10,000 upwards. it didnt happen, i sold it and bought the 10.

The guy who i was talking to about doing it. he had a 550HP busa... as his street bike... nice

[bonester]

Turbo kits are around $3.5k US which is pretty cheap horsepower. I've been tempted.

[kawadave]

Hasn't the penny dropped yet?....Rex's are demanding big money atm cause people are finally finding out what a great bike they are.

[born green]

Turbo kits are around $3.5k US which is pretty cheap horsepower. I've been tempted.

he was talking full rebuild, low comp pistons and all the bells ect,he didnt want to do it if i didnt go the whole way, and all the plumbing for the naked was going to be custom made... read not cheap... was was talking good HP, around 260 RWHP, would have been a fun naked..........

[bonester]

I reckon anything over 200hp would be almost unrideable on a short wheelbase bike like the ZRX. Easy enough to wheelie as it is.

[born green]

I reckon anything over 200hp would be almost unrideable on a short wheelbase bike like the ZRX. Easy enough to wheelie as it is.

Its one of those projects i never got around to doing... been a few over the years.. it would have been fun tho
Sort of finished a couple tho, the ELR was a nice jigger... the turbo Z from yesteryear was another..
As was 76 Z650 taken out to 874 and the cost of a house back then spent on that one.
And the 76 Z drag bike from the early 80's.. that still carried QLD rego no RWC back then and yer it had a couple of runs on the road got pulled over on that.... how do u explain wheelie bars the the cops???? that was a fun story........................

And the current 10, that is work in progress, the goal with that is to chase 205HP at the rear wheel... just for the fun of it.... deano says its not a problem. just want to play with that, before i get to old to remember it

[Phil]

If I do anything to mine it will be a futher upgrade of the chassis , I've already got enough HP to get into far to much trouble.........

That is until I ride Nelso's 1224 Turbo, then I'll want one

[Six Addict]

absolute power corrupts absolutely

[Gosling1]

absolute power corrupts absolutely

I like it !!

Pinchy you should get a book called Power Without Glory, one of the best reads I had back in the day.

Back on track - yeh Nelso you are right, a good - worked - ZZR1200 can pump out much the same hp as a stocker 12R, so there is probably not much point in arsing about with an engine swap......(btw they are selling ZZR1100 heads on US ebay for as low as $200 complete - one of those should go nicely on the 1000RX !! )

[bonester]

Nelso has a turbo? If so what is it like????????