Doh! Fairing and left side cover scratched :(

General Discussion
Forum rules
Post Reply
thewonderer
Warming up
Warming up
Posts: 80
Joined: Fri Mar 10, 2006 11:33 pm
Location: Bray Park, Brisbane

Doh! Fairing and left side cover scratched :(

Post by thewonderer »

Not my month, first pulled by the fuz, now some slight damage to the left side fairing and engine cover thanx to re-gritted road and brain in wrong gear.

:cry: :oops:

Luckily this all happened as i was coming to a dead stop when i missed my turning point and decided to stand her up and break. Stopped at the edge of the road where the left over grit was and thats where the bike decided to let the front wheel fold in. Leg was down but could stop it doing a slow motion tip over. All on the north side of mount mee near the bottom.

So I've been looking into getting a NRG side cover to hide the scratches of the engine cover and some sort of T-cut to polish out the scratches.

Scratches are light to medium in depth and i've got some swirl removal polish from supercheap which has just helped get the scratches back a bit.

I've never done anything like this before, so that's why I'm here to get the advice of you fellow bikers who've had to polish up there fairing.

Was thinking of getting some coarser polish (mine is a 2, maybe 5 or 6) and slowly working on it and then finish of with some black turtle wax.

Can you recommend any products for the fairing. Engine casing? Seems the poweder coating has come off... maybe polish it all off to chrome look?!

Cheers,

martin
Top
User avatar
ZZRCHIKKY
KSRC Contributor
KSRC Contributor
Posts: 1085
Joined: Sat Nov 05, 2005 7:07 pm
Bike: Ducati
State: Queensland
Location: G Town , Tasmania
Contact:
Contact ZZRCHIKKY

Post by ZZRCHIKKY »

tipex whipes out everything :D
owwww me lubs my dr 650 WOOOOOOOOOOOOOT
Top
chameleon
KSRC Regular
KSRC Regular
Posts: 763
Joined: Sat Nov 26, 2005 8:38 am
Location: Briso

Re: Doh! Fairing and left side cover scratched :(

Post by chameleon »

thewonderer wrote: Engine casing? Seems the poweder coating has come off... maybe polish it all off to chrome look?!
Just use a little touch up paint to start with as you probably wont notice it after a week anyway. You can always strip it all off later and polish the case if you want. My bike came with some scratches on the fairing and a couple on the tank but I only notice them when I'm waxing her. :wink:
Image
Top
User avatar
Rossi
KSRC Contributor
KSRC Contributor
Posts: 1656
Joined: Sat May 01, 2004 12:39 am
Bike: ZX9R
State: Victoria
Location: Vic : Epping

Post by Rossi »

Try your local Kwak dealer they do a touch up paint for the casing and the scratches.........elbow grease and lots of it
I don't suffer from insanity; I enjoy every minute of it.
Top
mick_dundee
Team Naked
Team Naked
Posts: 5344
Joined: Sat Jul 09, 2005 2:05 pm
Bike: Suzuki
State: Victoria
Location: Kilmore

Post by mick_dundee »

ZZRCHIKKY wrote:tipex whipes out everything :D
nah it doesn't fix your spelling at all :D
A good mate will bail you out of jail, a true mate will be sitting in the cell next to you saying "Damn, we fucked up!!!"
Top
User avatar
ttc
Team Black
Posts: 2893
Joined: Fri Nov 19, 2004 2:59 pm
Bike: Z1000
State: Queensland
Location: Brisbane

Post by ttc »

Hey.. :(

Kawasaki don't have a touch up paint available in oz for your bike

Depending on how bad it is i used nicko pen on mine :)

And if you're interested thay have a bling alloy cover with zx636 engraved into it at work
Image
Top
User avatar
ZZRCHIKKY
KSRC Contributor
KSRC Contributor
Posts: 1085
Joined: Sat Nov 05, 2005 7:07 pm
Bike: Ducati
State: Queensland
Location: G Town , Tasmania
Contact:
Contact ZZRCHIKKY

Post by ZZRCHIKKY »

mick_dundee wrote:
ZZRCHIKKY wrote:tipex whipes out everything :D
nah it doesn't fix your spelling at all :D
i didnt say fixes !

i bet if u filled in ur screen with tipex u wouldnt have a problem with my spelling :P
owwww me lubs my dr 650 WOOOOOOOOOOOOOT
Top
thewonderer
Warming up
Warming up
Posts: 80
Joined: Fri Mar 10, 2006 11:33 pm
Location: Bray Park, Brisbane

Post by thewonderer »

tippex.. thought that was a bit sus ;)

gonna try and t-cut the scratches out a bit more .. the are mainly 80 grain scratches...

as for the casing, having read a posting about colorrite who do spray cans and stuff that match the casing colour, i think i will sand off the paint and then spray if i can find a good touch paint.

Wondered if the paint will withstand the high temps coming from the engine... must reach at least 150 C... did kwak use a special paint/powder coating??

thanx for the advice!
Top
FrogZ
KSRC Contributor
KSRC Contributor
Posts: 2090
Joined: Tue Apr 11, 2006 12:58 pm
Location: Rockhampton CQ

Post by FrogZ »

I couldnt work out how to match the gold coloured cases on the 12 so I covered the scratches with a KSRC sticker !!
Attachments
ksrc cover.jpg
ksrc cover.jpg (61.66 KiB) Viewed 487 times
Just because you CAN ride, doesn't mean you SHOULD
Top
FrogZ
KSRC Contributor
KSRC Contributor
Posts: 2090
Joined: Tue Apr 11, 2006 12:58 pm
Location: Rockhampton CQ

Post by FrogZ »

Seriously but, most paint shops computer colour match anything you bring in (even matches the fading) and can stick it in an aerosol for you too....
Just because you CAN ride, doesn't mean you SHOULD
Top
mcswaff
Newbie
Posts: 17
Joined: Sat Jul 30, 2005 12:20 am
Location: Wagga Wagga

Post by mcswaff »

Dam dude sorry to hear about the drop, droped myn once but i was lucky/stupid, I was getting of and my foot cliped my bag and over went the bike lucky for me my legs were sorta under it OUCH so no damadge to the bike, legs were a little sore for a few days.
Iam What Willis Was Talkin' Bout
Top
User avatar
photomike666
Apprentice Post Whore :-)
Apprentice Post Whore :-)
Posts: 5956
Joined: Sat Jan 15, 2005 12:01 am
Bike: ZX10R
State: Victoria
Location: Melbourne
Contact:
Contact photomike666

Post by photomike666 »

Sorry to hear of the off dude. When I had my minor I used T-Cut colour restorer - came up sweet
--------------------------------------------------------------------------------------------------------------
07 ZX10R since new, tracky TBA, KX450F, 87 CR250 restoration, GT MTB - I've got serious thrill issues, dude
Top
Barrabob
KSRC Contributor
KSRC Contributor
Posts: 1882
Joined: Sat Sep 18, 2004 11:00 am
Location: Brisbane

Post by Barrabob »

Try a ebay shop called cycle therapy i thionk it was i bought a new one for 150 bucks us the case cover that is and it was a brand new part in a factory bag.

Plan b is ring around the bike repairs places in slacks creek and they can make it just like a new one for maybe less than a ebay one.

Is it the left hand side?? If it is leave the remove and replace to a pro because they attached the stator thingingy on the inside of the case with torx screws and glued and tightened them to 3 million foot pound with the kawaski robot lol.

Yeh they where in there seriuously tight and my mechanic snapped one of the bits in half getting them out. :shock:

Lucky its black it will be easierto fix the scratches. :D
If I rode my bike at the speed of light, what would happen when I switched on its headlights?

Image
Top
thewonderer
Warming up
Warming up
Posts: 80
Joined: Fri Mar 10, 2006 11:33 pm
Location: Bray Park, Brisbane

Post by thewonderer »

cheers bob... found the ebay shop. US by the looks of it, but no engine covers at the moment. Will see if a sand down and spray will do the job, so will be on the look out for a paint shop that can do the matching on the north side...

Will pick up some t-cut to work on the fairing tomorrow... supercheap has a good choice of things like that...


Good luck getting the kwak on the road again Bob!

martin
Top
mrmina
Apprentice Post Whore :-)
Apprentice Post Whore :-)
Posts: 7039
Joined: Wed Apr 21, 2004 8:11 pm
Location: Sydenham, Victoria

Post by mrmina »

no good as long as ur ok
[url]www.rmsmg.com.au
Top
Post Reply

Return to “General Discussion”