Kawasaki Sportsbike Riders Club - Australia - Online Forum

that was my next thing.they're local to me

iamwithstupid.gif
2010's as luck would have it you can remove the servo cables via DE CATing the bike for the 3/4 pipe fitment and as long as you don't fuk up the servo by forcing it IE: trying to turn it against the internal motor.
you don't need a servo eliminator, it just does its own thing ...

serco has plenty optimisers. but they don't like selling to the public.
my tuner rang at 9am and 1 was in his office same day and this was 8 days ago.

ok been down this road and this is from the horse's mouth and from personal experience.
i have a 2012 ZX10R
with a 3/4 yoshi R77d fited.
the yoshi came without the bung for the O2 sensor. ( what a fuk up)
anyway heres the scoop.
there is no way no how to get rid of the O2 sensor on the Australian ...

if your racing can't you use the kit ECU which should deleat the ABS factor?

g'day all.
I'm selling my 06 ZX6R and in doing that i have taken the bike back to almost factory spec.
i have a 04 ZX6R track bike that is a work in progress.
the question IS
will the powercommander off the 06 zx6 fit or be compatible with the 04 zx6??
and i'm not talking about mapping just plugs ...

Nah, chain's good, just checked to be sure, although I knew it was ok 'cos I'm thorough with maintenance and adjustments :?
Although I'm thinking, with hard braking (I do brake hard when needed) and stuff all weight on the rear tyre - and often momentarily off the ground, there'd be next to no ...

the Tokico's off the 03 to 06 ZX6 are awesome calipers. run HH EBC pads and they stop hard.
4 pot 4 pad.
the 02 had 6pots

wounderfull i need one right about now.
just got my 3/4 yoshi.

your going to need a heat gun to get the cartridge apart their lock tighted and a good vise with soft jaws. the toothed socket for the cartridge.
and the oil sucker thingy to set the air gap

either Carrazeria or Marchesini do a polished rim for your bike but not cheap
but they look soooo frickin good.

useing anything that dries slow is only asking for a shite job.
if you use better rattle cans and plenty of clear you can get an average finish that would be acceptable for a trackie.
mate did a white 05 zx10 in white from rattle can orange peeled to buggery.( road bike )
he loves it .
i think it ...

g day guys can anyone remember writing off a black 03 zx6r back in early 05 or late 04.
i just bought it
its been repaired and supposedly all good but when they fixed it they left the partialy crushed rad in it.
i'm assuming the front was a tad flattened.
the bike is a metalic charcoal black, has ...

can't wait to here how you did.
be good to here some positive stuff come from kawasaki racing.
the chain guard at the back thats not factory is it?
is that a requirment.

have u had a bad experience with them??
cloud 9