Thought this was a good place to start asking.
Been looking on the web for a pdf manual but there hard to find.
fork oil zzr1100d
fork oil zzr1100d
Who knows what weight fork oil and what height inside the fork leg for a zzr1100 d kyaba fork leg??
Thought this was a good place to start asking.
Been looking on the web for a pdf manual but there hard to find.
Thought this was a good place to start asking.
Been looking on the web for a pdf manual but there hard to find.
If I rode my bike at the speed of light, what would happen when I switched on its headlights?
-
Smitty
- VIP MEMBER
- Posts: 10912
- Joined: Wed Apr 21, 2004 1:59 pm
- Bike: ZX12R
- State: Victoria
- Location: 3rd rock from the Sun
- Contact:
Re: fork oil zzr1100d
most Kwakas use 5wBarrabob wrote:Who knows what weight fork oil and what height inside the fork leg for a zzr1100 d kyaba fork leg??
Thought this was a good place to start asking.
Been looking on the web for a pdf manual but there hard to find.
but I prefer 10w
and the manual..get one on eBay I reckon
as I have managed to get one for the 6s 7s 9s & 12s
over the past year or so (cost?..about $5-8 each)
GOTTA LUV the 12R!!
Thanks smitty not my bike though thought someone like ronster might know though.
Or I-K might know as well as sthe size of the holes in the damping rods and the rebound and compression stacks inside the rear shock.
Did a bit of a check around the forums but couldnt find anything specific so thought this a good place to ask.
Or I-K might know as well as sthe size of the holes in the damping rods and the rebound and compression stacks inside the rear shock.
Did a bit of a check around the forums but couldnt find anything specific so thought this a good place to ask.
If I rode my bike at the speed of light, what would happen when I switched on its headlights?
-
Gosling1
- Team Donut
- Posts: 13826
- Joined: Mon Jun 20, 2005 9:30 pm
- Bike: ZX2R
- State: New South Wales
- Location: Anarchy Road
- Contact:
Barrabob wrote:.....Or I-K might know as well as sthe size of the holes in the damping rods and the rebound and compression stacks inside the rear shock.
depends on the month of manufacture mate, I believe the damping holes were modified by 1/100" between June 25th and August 14th...I got no idea about rebound stacks 
".....shut the gate on this one Maxie......it's the ducks guts !!............."
errr that was i-k not gosling that was suposed to regurgitate the information but seriously folks no one knoes for sure what forkoil and how high for a zzr1100 d.
can take a educated guess that its 10 weight and 95mm but would rather not guess.
can take a educated guess that its 10 weight and 95mm but would rather not guess.
If I rode my bike at the speed of light, what would happen when I switched on its headlights?
