zx7r undertray?
zx7r undertray?
hey everyone, a question to zx7r owners...ive just bough myself an r reg 7r, and have been looking around at undertrays,any advice on which is a good quality one to go for?has anyone here fitted one?how much trimming is required?thanks a lot, matt
- Damon Z1000
- KSRC Contributor
- Posts: 1617
- Joined: Sun Oct 10, 2004 4:13 pm
- Bike: Z1000
- State: New South Wales
- Location: Bligh Park NSW
whereabouts you from mate, I'm a pom, been over here 2 years and lovin it.
Google a currency converter and you will have no probs.
Rough estimate, divide by 2.5
Oh and by the way our petrol at the moment has gone up to around $1.30 a litre, thats about 55 pence a litre
What is it back at home now?
Cheers
Damon
Google a currency converter and you will have no probs.
Rough estimate, divide by 2.5
Oh and by the way our petrol at the moment has gone up to around $1.30 a litre, thats about 55 pence a litre

Cheers
Damon
Watch This Space.......I Told You Didn't I?
Officially Honoury Member NWSHCIAVANEWFARKINBIKE 2009.
Team Crash 2010 Ooooops
Officially Honoury Member NWSHCIAVANEWFARKINBIKE 2009.
Team Crash 2010 Ooooops
- ty
- Team Ninja
- Posts: 2869
- Joined: Thu Apr 22, 2004 9:24 am
- Bike: Honda
- State: New South Wales
- Location: Gosford
- Contact:
Damon ZX9R wrote:petrol at the moment has gone up to around $1.30 a litre,
You got it good Damon. Prices along the pacific hwy are all $1.39 for regular, $1.50 for 98 premium

If you have no fear, you're not going fast enough.
Never argue with an idiot. He'll drag you down to his level, then beat you with experience.
Never argue with an idiot. He'll drag you down to his level, then beat you with experience.
-
- Warming up
- Posts: 84
- Joined: Tue Oct 26, 2004 10:14 pm
- Location: DorroughBling! NSW
- Contact:
I do Ermax undertrays, they have one for your model!
Difference between PB and Ermax: Quality (3mm ABS for Ermax I believe only 2mm for PB) and Ermax fit, not always the case for PB stuff.
You can have it with integrated indicators or not, and if you still have the factory colour, it will be colour matched!
You will have to cut off the rear guard and may have a little grinding to do. For the rear light set up you want, there could be a way if you have some DIY soul in you!
I have an Ermax order in preparation, can add a few parts still, contact me if you're interested...
Difference between PB and Ermax: Quality (3mm ABS for Ermax I believe only 2mm for PB) and Ermax fit, not always the case for PB stuff.
You can have it with integrated indicators or not, and if you still have the factory colour, it will be colour matched!
You will have to cut off the rear guard and may have a little grinding to do. For the rear light set up you want, there could be a way if you have some DIY soul in you!
I have an Ermax order in preparation, can add a few parts still, contact me if you're interested...
Be part of the Revolution with Frozzie Connections.
-
- KSRC Member
- Posts: 482
- Joined: Fri Dec 10, 2004 11:44 am
- Bike: ZX7R
- State: South Australia
- Location: Adelaide, S.A.
i got mine with a hugger from http://www.superbikestore.com/
it was about $150Aud cheaper than the local dealer but Powerbornze being from th uk in the first place you might get em cheaper over there.
BTW where are you in blighty?
I lived there for a few years, mainy in north east london (leytonstone, dodgy as hell i know) but i also spent a bit of time in leeds, which was absolutely f'ing great. To the point that even considering their religation, im still a leeds united fan.
ment
it was about $150Aud cheaper than the local dealer but Powerbornze being from th uk in the first place you might get em cheaper over there.
BTW where are you in blighty?
I lived there for a few years, mainy in north east london (leytonstone, dodgy as hell i know) but i also spent a bit of time in leeds, which was absolutely f'ing great. To the point that even considering their religation, im still a leeds united fan.
ment
