Waterpump re-conditioning

[B-line]

Anybody had any luck getting one reconditioned ?, looks like one of the seals has gone in mine, I replaced the O rings but its still leaking, and I really dont feel like forking out $400 for a newie !

Thanks
Bryan

[Smitty]

mate...
bike?
model?
year?

sure we can help....

[B-line]

GPZ900r A1 84 model



Thanks Yoda !

[Smitty]

oh..oh
gunna have ta dig into the brain cells for that one
now who had/has a Gpz900..?
tape I think

mate
will investigate and post back

cheers

[bonester]

Why not try Independant Motorcycle Werckers in Toowoomba- Warren should have a pump for you- he's pretty reasonable pricing wise too.

[B-line]

Yeah saw Warren on monday all he has is some 2nd hand ones that he reckons are probably in the same kinda state, he suggested them as a last resort !, and if I cant turn anything up here I might just end up going that way !

Thanks for the reply

Bryan

[Smitty]

hmmmm
piccie attached
by the looks, there are 2 seals
- a gasket seal for the front outlet and a rear oring
to seal the back
so
Bryan,
where is it leaking..?
coz there are only 4 possible places...
pinhole in body or cover (alloy has corroded)
out thru the bearing
out thru the oring
out thru the front plate gasket

more info pleeze mate

[B-line]

There is a "drainage outlet passage" at the bottom of the pump, and its leaking from there, both the O rings have been replaced so I can only assume it is the bearing seals that are gone, just took it for a quick test and it is not leaking badly but bad enough to worry ! so yeah looks like I need to either get it recond or a new one !

[B-line]

Now its slowed right up but its now a coolant/oil mix which is a worry, must be seeping thru the bearing, Ok the question still stands does anybody know where I could get it recond ??

Thanks for the help so far guy's !

much appreciated

bryan