GPZ1100 Carbs leaking.

All GPx and GPz Models
Post Reply
yorkieUK
Newbie
Posts: 1
Joined: Thu Dec 24, 2015 12:33 am
Bike: Other Kawi
State: Overseas

GPZ1100 Carbs leaking.

Post by yorkieUK »

Hi All. help.gif
My '82 GPZ1100 started peeing fuel out of the #2 carb. It comes out of the bottom drain when the engine is running.
Only started on the way home last night. Could it be the throttle slide that is stuck? :?:
Thought I'd get some feedback :prayer: before I started stripping it in case I needed to order any parts.
c005.jpg
c004.jpg
WP_20151214_009v.jpg
User avatar
kawadave
KSRC Regular
KSRC Regular
Posts: 814
Joined: Sun Nov 07, 2010 7:45 pm
Bike: ZRX
State: Queensland
Location: Bundaberg. qld

Re: GPZ1100 Carbs leaking.

Post by kawadave »

Had a similar problem with my Z1r.
Tracked it down to an aftermarket bowl gasket not allowing the float to move freely.

You could try tapping that carb with something...it may free up the float.
Other than that...replace the float needle.
Don't knock my turbo lag - it gives your naturally aspirated a chance..

2013 Motogp tipping champ.

83 GPZ 750 Turbo
78 Z1R 1000
80 Z1R Mk11
07 ZRX 1200r
83 GSX1000sd Katana





https://www.youtube.com/user/htmonaro
Gav
KSRC Regular
KSRC Regular
Posts: 665
Joined: Tue Mar 31, 2009 5:14 pm
Bike: Don't have one
State: New South Wales

Re: GPZ1100 Carbs leaking.

Post by Gav »

Give the bowl a tap mate..Might be a stuck needle for the float.
pkay
KSRC Member
KSRC Member
Posts: 158
Joined: Thu Jan 30, 2014 1:13 pm
Bike: ZXR750
State: Queensland
Location: Brizvegas

Re: GPZ1100 Carbs leaking.

Post by pkay »

If you haven't been fiddling with it could be a bit of crap stuck in the needle seat preventing it from sealing properly. If the tap doesn't work you may been to pull off the bowl and give it a clean. As well as the tap give a good rock to see if it dislodges anything stuck in the seat (but cleaning it is the best option cause you'll be surprised what you find in the bowl even if you run inline fuel filters).
PK
"Too many bikes is never enough"
ZXR750H1,GPX750R,GPz600R,750,900R,1000RX,KR250,Z1a,Mach3,Z1300 and..
Post Reply