Fitting a quick shifter
Fitting a quick shifter
I have a quick shifter that I am going to fit to my zx14r. Hm type. How long should it take to fit and any tips or tricks?
-
Baddie
- KSRC Member
- Posts: 310
- Joined: Sat Oct 02, 2010 9:02 am
- Bike: ZX10R
- State: New South Wales
- Location: Glenmore Park
- Contact:
Re: Fitting a quick shifter
If you buy standalone "HM" unit try and connect directly to your OEM harness.
http://superbikesource.com.au/
For aftermarket racing products, from Annitori Quickshifters to Race fairings.
http://tarmactalk.com/forum/forum.php
For aftermarket racing products, from Annitori Quickshifters to Race fairings.
http://tarmactalk.com/forum/forum.php
-
ducati_paul
- KSRC Contributor
- Posts: 1713
- Joined: Tue Aug 22, 2006 8:58 pm
- Bike: ZX10R
- State: New South Wales
- Location: Sydney
Re: Fitting a quick shifter
I fitted an HM to my ZX10R, the actual fitting took about 5 minutes (plugs into the top of the coils) then just add how long it takes to remove and replace a tank .... About an hour for me LOL 
2012 Royal Enfield Military for the Road
-
Maccarocks
- KSRC Regular
- Posts: 571
- Joined: Tue Jan 22, 2008 7:02 am
- Bike: ZX10R
- State: Victoria
- Location: Melbourne, Victoria
Re: Fitting a quick shifter
Yes it's an easy fit....
Just depends on how long it takes you to remove everything...!! But having said that if you are unsure, dont worry about how long it will take, just do it step by step and make sure you remember how everything goes back on.. do the install and make sure the wiring is perfect, loomed up nicely with the other wiring and not going to rub on anything.. double check this stuff so you don't get problems in the future...
Macca
Just depends on how long it takes you to remove everything...!! But having said that if you are unsure, dont worry about how long it will take, just do it step by step and make sure you remember how everything goes back on.. do the install and make sure the wiring is perfect, loomed up nicely with the other wiring and not going to rub on anything.. double check this stuff so you don't get problems in the future...
Macca
Maccarocks
16' - Z1000 (Road)
Too many other bikes to fit in here !!
16' - Z1000 (Road)
Too many other bikes to fit in here !!