05 ZX10 Race Set-up

For general Technical and Performance Discussions
Post Reply
Jon13
Newbie
Posts: 23
Joined: Fri Sep 18, 2009 10:58 am
Bike: ZX6R
State: New South Wales

05 ZX10 Race Set-up

Post by Jon13 »

Hi All,

I'm setting up an 05 ZX10 to race this year and any advice on gearing for E Creek, Wakefield, Winton ect. Also on ride hights ie spacers in rear or forks pushed through ect would be greatly appreciated....

Thanks
Jonathan
User avatar
UncleChopChop
KSRC Member
KSRC Member
Posts: 221
Joined: Fri Aug 22, 2008 9:58 pm
Bike: ZRX
State: Tasmania
Location: Tasmania

05 ZX10 Race Set-up

Post by UncleChopChop »

PM Madkaw if u havent heard from him already. The ol carnt cant move but he knows his shite with them Crims.
User avatar
Nelso
VIP MEMBER
VIP MEMBER
Posts: 3691
Joined: Wed Feb 13, 2008 9:22 pm
Bike: ZRX
State: New South Wales
Location: Wollongong

Re: 05 ZX10 Race Set-up

Post by Nelso »

Mine is down a tooth on the front and up one on the rear and it's still a little too tall. You could go up two or three on the rear for Eastern Creek and at Wakefield you won't need 6th gear at all. I've never been to Winton, so can't help you there. Mine is jacked up at the rear but I couldn't tell you exact measurements, however it needs to be raised higher still. The front is dropped 6mm. HTH
Green '08 ZRX1200 Road bike
Green 2012 ZX10 Track/race bike
Green '89 H1 ZXR750 race bike
'89 RMX250 motard race bike
2015 YZ450
2017 KTM EXC300
Jon13
Newbie
Posts: 23
Joined: Fri Sep 18, 2009 10:58 am
Bike: ZX6R
State: New South Wales

Re: 05 ZX10 Race Set-up

Post by Jon13 »

Thanks Boys.............
Post Reply