removing the starter motor on a gpz900r

For general Technical and Performance Discussions
Post Reply
dangerman
Newbie
Posts: 1
Joined: Sun Mar 28, 2010 7:42 pm
Bike: GPz900
State: New South Wales

removing the starter motor on a gpz900r

Post by dangerman »

Hi can you guys help with hints to removing the starter motor on a gpz900r. I' ve looked in service manuals but there it has not been particularly helpful. Any ideas please. dangerman.
h.b.bear
KSRC Contributor
KSRC Contributor
Posts: 1175
Joined: Wed Oct 27, 2010 2:21 pm
Bike: ZRX
State: New South Wales
Location: Tamworth NSW

Re: removing the starter motor on a gpz900r

Post by h.b.bear »

not sure on your year model,but this little bit might be of some help

http://www.kawasakimotorcycle.org/forum ... ssues.html
User avatar
MAXUMIS
KSRC Contributor
KSRC Contributor
Posts: 1034
Joined: Fri Jul 09, 2010 7:16 pm
Bike: ZX12R
State: New South Wales

Re: removing the starter motor on a gpz900r

Post by MAXUMIS »

disconnect the battery first and the rest should be a peice of cake if it fits between the frame +motor hear is a pic of the starter it should be behind the blockImage
life starts at 200 kph!
JonW
Warming up
Warming up
Posts: 47
Joined: Tue Oct 05, 2010 9:45 pm
Bike: GPz900
State: New South Wales

Re: removing the starter motor on a gpz900r

Post by JonW »

MAXUMIS wrote:disconnect the battery first and the rest should be a peice of cake if it fits between the frame +motor hear is a pic of the starter it should be behind the blockImage
If you want the starter clutch then the motor has to come out and the gear case gets split.
Compact yes, easy to work on, not so much.
Post Reply