ZXR fork springs
-
netbikes
- Warming up
- Posts: 95
- Joined: Tue Aug 05, 2008 10:07 pm
- Bike: ZXR750
- State: Queensland
- Location: Brisbane
- Contact:
ZXR fork springs
Does anyone have any specs on H1 fork spring length and ware limit?, The front end sag about 1 inch just sitting, and there doesn't seem to be a lot of rebound.
cheers.....
chris at www.netbikes com au
It's too late when you're in the ground.
chris at www.netbikes com au
It's too late when you're in the ground.
-
duspeed
- Newbie
- Posts: 8
- Joined: Tue Jun 30, 2009 7:33 pm
- Bike: ZXR750
- State: New South Wales
- Location: sydney
Re: ZXR fork springs
Zxr H Front fork spring free length is 387.5mm Service limit is 380mm
Also fork fluid is 135mm +or -2mm below from top off inner tube (fully compressed ,without main spring)
Dus
Also fork fluid is 135mm +or -2mm below from top off inner tube (fully compressed ,without main spring)
Dus
-
netbikes
- Warming up
- Posts: 95
- Joined: Tue Aug 05, 2008 10:07 pm
- Bike: ZXR750
- State: Queensland
- Location: Brisbane
- Contact:
Re: ZXR fork springs
Thanks Dus, I did get that info from the manual too but I still wasn't convinced, have checked out another the same model since and it is the same.
I have pretty much finished the restro now, just waiting on a few rubbers from Kawasaki to arrive so I can fully fit all the fairings.
I have pretty much finished the restro now, just waiting on a few rubbers from Kawasaki to arrive so I can fully fit all the fairings.
cheers.....
chris at www.netbikes com au
It's too late when you're in the ground.
chris at www.netbikes com au
It's too late when you're in the ground.