Does anyone have the torque setting for the steering head bolt? The top one that is, I cant seem to find my manual anywhere.
Cheers Blair
have a look at my race GPX on my website if you feel so inclined
http://www.fullspeed.to/pickleracing
Steering Head Bolt
-
Thepickle94
- Newbie
- Posts: 2
- Joined: Sat Feb 05, 2011 7:10 pm
- Bike: GPx250
- State: Overseas
- Location: Palmerston North, New Zealand
- Contact:
-
robracer
- VIP MEMBER
- Posts: 15251
- Joined: Thu Feb 24, 2005 8:23 pm
- Bike: ZX6R
- State: New South Wales
- Location: Port Macquarie
Re: Steering Head Bolt
Hi Blair, welcome to KSRC 
With the steering head bold I would usually do by hand to check for binding....with the front of the deck I tighten until she just starts to get hard to turn then back off slightly.
Oh & nice website, your avitar on here is a worry
slight lowside 
With the steering head bold I would usually do by hand to check for binding....with the front of the deck I tighten until she just starts to get hard to turn then back off slightly. Oh & nice website, your avitar on here is a worry
slight lowside -
Thepickle94
- Newbie
- Posts: 2
- Joined: Sat Feb 05, 2011 7:10 pm
- Bike: GPx250
- State: Overseas
- Location: Palmerston North, New Zealand
- Contact:
Re: Steering Head Bolt
Yes one of those moments when I should have thought about racing not what was on the shopping list. Not alot of damage tho. The ol girl (GPX) dosent go to bad for a bike that was made to go to the shops on. Upgrading to a newer 250 at the end of this season.
RE bolt..thats I was going to do as well so was just really a reasurance thing.
RE bolt..thats I was going to do as well so was just really a reasurance thing.