John spent a lot of time and effort on our bikes, mine in particular, to try and get them running there best. Unfortunately for Russel a fault in his PC3 meant the throttle position sensor wasn't working correctly and he couldn't do much with it, but using my map found the air fuel ratio was just about spot on for Russ's bike.
My bike was another story though, as this was Johns old race bike, he had a bit of interest in seeing what he could get out of it.... and boy did he try..
The bike had already been mapped previously so extracting more ponies was always going to be difficult, but after trying numerous combinations of fuel / air mixture options he came up with a setup that picked up another 5 hp on top and good gains thru the midrange....
John would not take the bike off the dyno until he was happy with it... We had to crow bar him of it so we could get to P.I.... Great stuff...
John then came out to P.I. and did the double header track days with us, giving great advice on lines, gearing and markers that helped everyone that listened.
So if your looking for a good dealer for bikes, parts or servicing give John at Mornington Kawasaki a call and he'll look after ya, but if you getting dyno work done be prepared to stay back a bit... It'll be worth it...
