On my way in to work this morning I was sitting at lights when my FI light came on (it has never come on before) and it stayed on for about 30 seconds after I took off, then went off again.
Any idea why this would happen and should I just ignore it unless it happens again?
Colette - did you end up getting an aftermarket exhaust?
When I replaced the stock exhaust, the removal of the stock exhaust valve made the FI light come on. The "fix" for that sometimes doesn't work on my bike and my FI light will come on and stay on (usually) until I remove and re-insert the "fix" bit.
Road: 2005 ZX10R - not named yet
Road: 2008 Z750 - Kwak
Track: 2006 ZX6R - Yoshi (with a very Genki undertail)
it defnatly fuel injection and it's usually the exhaust servo under the seat that jams up a bit/stops working......dunno why they wired it up to the f.i. light but it's nothng to worry about....
My FI light has black tape over it to stop annoying me. My can and PC3 make my "FI" light come on but the bike continues to be f&%$ing lovely. Next service they can put an air filter in and have a dip at the light. Not a problem really. I've seen threads which just say take the cable of the pulley that opens/closes an air valve in the exhaust so that it's open permanently. I may get onto that when I get back from OS.
