Hey guys,
Im looking a buying at Two Brother exhuast slip on but would like to know if i get the mid pipe section with it or do i have to make one up?? and how would performance be like?
Also i understand tthat the rear fender would have to be altered. Would i have to buy a new rear fender?
Any help would be greatly appreciated.
thanks
jimmy
ZX6R exhuast slip on
- dave#3
- Team Ninja
- Posts: 3098
- Joined: Mon Apr 26, 2004 7:11 pm
- Bike: Z1000
- State: New South Wales
- Location: Kyogle, NSW
- Contact:
Re: ZX6R exhuast slip on
What year model 6 Jimmy? The can should come with the link pipe, performance should increase slightly at the top end and probably decrease a little down low. Generally if you need a new fender one will come with the can too.
dave#3 | '03 z1000 roadie | '08 zx6r tracky | '03 KLX400R dirty
http://www.oz4x4.net/gallery2
Winner - KSRC Murphy's Law Award 2008
http://www.oz4x4.net/gallery2
Winner - KSRC Murphy's Law Award 2008
- Six Addict
- Pinchy
- Posts: 6465
- Joined: Sun Apr 06, 2008 3:51 pm
- Bike: Ducati
- State: New South Wales
- Location: Darlinghurst, Sydney
Re: ZX6R exhuast slip on
thats my understanding too, two brothers sell the fender for the 6 along with the pipe
DUCATI HYPERMOTARD 2014
-
- Newbie
- Posts: 11
- Joined: Tue May 06, 2008 1:56 pm
- Bike: ZX6R
- State: South Australia
- Location: Adelaide
Re: ZX6R exhuast slip on
Hey guys,
Ohh yeah forgot to put the year
my bike is a 05.
I had a look around and have seen the 2 muffler underseat 2 bros but not sure which way to go. Wat would be the pricing on a single muffler and a dual muffler?? and where can i get it from?
any benefits with the dual muffler over the single can??
sorry for the questions?
Cheers
Jimmy
Ohh yeah forgot to put the year

I had a look around and have seen the 2 muffler underseat 2 bros but not sure which way to go. Wat would be the pricing on a single muffler and a dual muffler?? and where can i get it from?
any benefits with the dual muffler over the single can??
sorry for the questions?
Cheers
Jimmy
- Six Addict
- Pinchy
- Posts: 6465
- Joined: Sun Apr 06, 2008 3:51 pm
- Bike: Ducati
- State: New South Wales
- Location: Darlinghurst, Sydney
Re: ZX6R exhuast slip on
given the dollar these days id say your looking at close to a gorilla for the can but maybe not...
try your local bike shop or one of these us websites
morepowerracing.com.au
jcmotors.com
starcycle.com
bikebandit.com
try your local bike shop or one of these us websites
morepowerracing.com.au
jcmotors.com
starcycle.com
bikebandit.com
DUCATI HYPERMOTARD 2014
- robracer
- VIP MEMBER
- Posts: 15251
- Joined: Thu Feb 24, 2005 8:23 pm
- Bike: ZX6R
- State: New South Wales
- Location: Port Macquarie
Re: ZX6R exhuast slip on
Paging Cath
Go the 2 bros Jimmy, they are a pretty impressive pipe

Go the 2 bros Jimmy, they are a pretty impressive pipe

- Cath
- KSRC Addict
- Posts: 3447
- Joined: Wed Oct 13, 2004 9:08 pm
- Bike: ZX10R
- State: New South Wales
- Location: Yarramalongwayaway
Re: ZX6R exhuast slip on
Don't apologise for asking questions mate!jimersees wrote:Hey guys,
Ohh yeah forgot to put the yearmy bike is a 05.
I had a look around and have seen the 2 muffler underseat 2 bros but not sure which way to go. Wat would be the pricing on a single muffler and a dual muffler?? and where can i get it from?
any benefits with the dual muffler over the single can??
sorry for the questions?
Cheers
Jimmy
As Six Addict posted, you probably won't get much change from 1K. And that's for the slip-on, not the full system.
The exhaust for the '05- '06 ZX6 is only available in the dual can, not the single. You can get it in aluminium, titanium and carbon fibre (listed from cheapest to most expensive).
You can see some pics of my '06 with the 2 Bros, as well as other exhausts that suit the '05 - '06 636 here
Apparently, there are many suppliers in Australia that can now get you the Two Brothers - when I got mine, there were no suppliers that I could find and so I was forced to import from the US. It comes with a fender eliminator. The indicators that come with the kit suck - the bulbs couldn't be changed so if you blew one, you needed to get new indicators.
Also, be aware that the fender eliminator bracket vibrates a lot - you may end up going through a few sets of after-market indicators before you find one that doesn't break /split due to the vibrations. If you do - let me know

Road: 2005 ZX10R - not named yet
Road: 2008 Z750 - Kwak
Track: 2006 ZX6R - Yoshi (with a very Genki undertail)
Road: 2008 Z750 - Kwak
Track: 2006 ZX6R - Yoshi (with a very Genki undertail)
- red_dave
- Team Kuda
- Posts: 7973
- Joined: Thu Oct 07, 2004 12:47 pm
- Bike: ZX6R
- State: Queensland
- Location: Dodgy BrisVegas
- Contact:
Re: ZX6R exhuast slip on
Hey man...
If you wanna see all the options available look here -----> http://www.ninja6zone.com/forums/showthread.php?t=2529
The Two Brothers is farken sexy...
If you wanna see all the options available look here -----> http://www.ninja6zone.com/forums/showthread.php?t=2529
The Two Brothers is farken sexy...

