99 zx6 vs 99zx9 seating position

For general Technical and Performance Discussions
GlennB
KSRC Member
KSRC Member
Posts: 152
Joined: Wed Nov 23, 2005 6:41 pm
Location: Geelong

99 zx6 vs 99zx9 seating position

Post by GlennB »

Im thinking of selling my car and using my bike for sole transportation but its a 99zx6 and can be a little uncomfortable on it on long distances.
I was wondering if the 99zx9 has more of an upright seating position on it, or is the same? I want a bike that I can still fang on track days and I can almost do a clean swap from the 6 to the 9.
Cheers
Glenn
Image
User avatar
dave#3
Team Ninja
Posts: 3098
Joined: Mon Apr 26, 2004 7:11 pm
Bike: Z1000
State: New South Wales
Location: Kyogle, NSW
Contact:

Re: 99 zx6 vs 99zx9 seating position

Post by dave#3 »

Pretty much the same mate. The '99 zx9r has the clip-ons above the triple clamp instead of below, but they're angled down instead of up, so they're about the same .... the 9r might even be a bit further to reach. I don't think you'll get anything more comfortable than the late 90's 6 or 9 that's anywhere near as sporty ... even the later 9's are a bit more aggressive with the clip-ons below the triples.

I think it's time to HTFU :D
dave#3 | '03 z1000 roadie | '08 zx6r tracky | '03 KLX400R dirty
http://www.oz4x4.net/gallery2
Winner - KSRC Murphy's Law Award 2008
User avatar
z900/zx9
KSRC Contributor
KSRC Contributor
Posts: 2796
Joined: Wed Nov 02, 2005 1:33 pm
Location: Kawasakiville Victoria

Re: 99 zx6 vs 99zx9 seating position

Post by z900/zx9 »

Mine nines an 02 zx9 and the clip ons are above the triples and its really comfy ;)
http://tinypic.com/hu369k.jpg[/img]
Z900, z900RS , H2 Ninja 1000 Supercharged. FPV Supercharged Pursuit ute..
User avatar
dave#3
Team Ninja
Posts: 3098
Joined: Mon Apr 26, 2004 7:11 pm
Bike: Z1000
State: New South Wales
Location: Kyogle, NSW
Contact:

Re: 99 zx6 vs 99zx9 seating position

Post by dave#3 »

z900/zx9 wrote:Mine nines an 02 zx9 and the clip ons are above the triples and its really comfy ;)
Are they? I'm pretty sure you'll find they're mounted below the triple clamps, but they do sit up. The C series 9 has the clip-ons above the triples sitting down.
dave#3 | '03 z1000 roadie | '08 zx6r tracky | '03 KLX400R dirty
http://www.oz4x4.net/gallery2
Winner - KSRC Murphy's Law Award 2008
Rusty
KSRC Regular
KSRC Regular
Posts: 690
Joined: Sat Nov 20, 2004 11:57 am
Bike: ZX9R
State: Queensland
Location: Brisbane

Re: 99 zx6 vs 99zx9 seating position

Post by Rusty »

My nine's an 02, and the clip ons are definitely mounted below the triple. It's still really comfy.
GlennB
KSRC Member
KSRC Member
Posts: 152
Joined: Wed Nov 23, 2005 6:41 pm
Location: Geelong

Re: 99 zx6 vs 99zx9 seating position

Post by GlennB »

bugger :cry: Thanks for the info. Might have to cross over to the dark side and get a VTR100F :shock:
Image
User avatar
dave#3
Team Ninja
Posts: 3098
Joined: Mon Apr 26, 2004 7:11 pm
Bike: Z1000
State: New South Wales
Location: Kyogle, NSW
Contact:

Re: 99 zx6 vs 99zx9 seating position

Post by dave#3 »

GlennB wrote:bugger :cry: Thanks for the info. Might have to cross over to the dark side and get a VTR100F :shock:
Why not just get a Harley and be done with it :D. In all seriousness, if it's only clip-on height that's causing you grief what about either a set of heli bars or a mx bar conversion.
dave#3 | '03 z1000 roadie | '08 zx6r tracky | '03 KLX400R dirty
http://www.oz4x4.net/gallery2
Winner - KSRC Murphy's Law Award 2008
GlennB
KSRC Member
KSRC Member
Posts: 152
Joined: Wed Nov 23, 2005 6:41 pm
Location: Geelong

Re: 99 zx6 vs 99zx9 seating position

Post by GlennB »

dave#3 wrote:
GlennB wrote:bugger :cry: Thanks for the info. Might have to cross over to the dark side and get a VTR100F :shock:
Why not just get a Harley and be done with it :D. In all seriousness, if it's only clip-on height that's causing you grief what about either a set of heli bars or a mx bar conversion.
Ok ok speak to me, are there cheap options to comfort my ride? I don't under stand the clip on height thing, please explain and all I want is, if I can have a more comfortable ride from my bike (or a zx9) for my traveling and be able to still be good for a fang for a track day. :D I do find this bike fairly comfortable buy wouldn't mind being a little more up right, not a huge deal though.
cheers
Glenn
Image
User avatar
dave#3
Team Ninja
Posts: 3098
Joined: Mon Apr 26, 2004 7:11 pm
Bike: Z1000
State: New South Wales
Location: Kyogle, NSW
Contact:

Re: 99 zx6 vs 99zx9 seating position

Post by dave#3 »

Helibars lift the clip-ons:
1 1/2" Taller
1/2" More Rearward
1/2" Wider Overall

Image

Image

Have a look at http://www.helibars.com/proddetail.php?prod=HB4009b for more details.

Another alternative might be the mx bars:
Replace your top triple clamp with a comfort-kit yoke. Nice and upright, good leverage, like crossing your zx6 with a z750.

Image

Have a look at http://ausfr.com.au/cart/shopexd.asp?id=147 for more details.
dave#3 | '03 z1000 roadie | '08 zx6r tracky | '03 KLX400R dirty
http://www.oz4x4.net/gallery2
Winner - KSRC Murphy's Law Award 2008
User avatar
Nanna10r
Team Ninja
Posts: 4291
Joined: Wed Jul 14, 2004 10:42 pm
Bike: ZX10R
State: Queensland
Location: Brisbane Australia

Re: 99 zx6 vs 99zx9 seating position

Post by Nanna10r »

Oh & Toss a Lambswool seat cover on it as well. Makes a big difference on longer rides. Should also Freak the fully Sik Gixxer boys out at the trackdays as well. ;)
"Nan & Pop Racing"
Poppy Hops on .... CBR150 (Superlite) CBR954 "Blade"
Nanna Naps on .... MoriWAKI NSR85 (Motolite) ZX10R "Crim"
We may ride like Old Can'ts, But Phuk we look DOOG !!!!!!
GlennB
KSRC Member
KSRC Member
Posts: 152
Joined: Wed Nov 23, 2005 6:41 pm
Location: Geelong

Re: 99 zx6 vs 99zx9 seating position

Post by GlennB »

dave#3 wrote:Helibars lift the clip-ons:
1 1/2" Taller
1/2" More Rearward
1/2" Wider Overall

Image

Image

Have a look at http://www.helibars.com/proddetail.php?prod=HB4009b for more details.

Another alternative might be the mx bars:
Replace your top triple clamp with a comfort-kit yoke. Nice and upright, good leverage, like crossing your zx6 with a z750.

Image

Have a look at http://ausfr.com.au/cart/shopexd.asp?id=147 for more details.
thankyou :D
The helibars look like what I am looking for. but i couldnt see any for my 99, the ones you posted are for the 00. I guess if i cant find these for my model it gives me a reason to go the 9 or even maybe go a '04' 10 :twisted: if i can find a cheap one.
Thanks again
Glenn
Image
User avatar
maraach
KSRC Member
KSRC Member
Posts: 169
Joined: Wed Apr 09, 2008 1:11 pm
Bike: Suzuki
State: New South Wales

Re: 99 zx6 vs 99zx9 seating position

Post by maraach »

i thoroughly recommend the E series 9. It even comes in the same colour as your old one if you are keen on that.

Not that i can compare too much, as its the only 9 i have ever owned, but i have to say, it's a great bike :P
User avatar
dave#3
Team Ninja
Posts: 3098
Joined: Mon Apr 26, 2004 7:11 pm
Bike: Z1000
State: New South Wales
Location: Kyogle, NSW
Contact:

Re: 99 zx6 vs 99zx9 seating position

Post by dave#3 »

I think the '00 zx6r helibars will fit your '99 zx6r.
dave#3 | '03 z1000 roadie | '08 zx6r tracky | '03 KLX400R dirty
http://www.oz4x4.net/gallery2
Winner - KSRC Murphy's Law Award 2008
GlennB
KSRC Member
KSRC Member
Posts: 152
Joined: Wed Nov 23, 2005 6:41 pm
Location: Geelong

Re: 99 zx6 vs 99zx9 seating position

Post by GlennB »

dave#3 wrote:I think the '00 zx6r helibars will fit your '99 zx6r.
Bugger :cry: I guess its the 9 is the go :twisted: who wants a 99 zx6r 8)
Image
User avatar
dave#3
Team Ninja
Posts: 3098
Joined: Mon Apr 26, 2004 7:11 pm
Bike: Z1000
State: New South Wales
Location: Kyogle, NSW
Contact:

Re: 99 zx6 vs 99zx9 seating position

Post by dave#3 »

GlennB wrote:
dave#3 wrote:I think the '00 zx6r helibars will fit your '99 zx6r.
Bugger :cry: I guess its the 9 is the go :twisted: who wants a 99 zx6r 8)

Ha? They WILL fit your 6 .... but, who am I to discourage you from getting a 9.
dave#3 | '03 z1000 roadie | '08 zx6r tracky | '03 KLX400R dirty
http://www.oz4x4.net/gallery2
Winner - KSRC Murphy's Law Award 2008
Post Reply