ZX6rShock
-
- KSRC Member
- Posts: 190
- Joined: Mon Apr 04, 2005 11:54 am
- Bike: Z1000
- State: New South Wales
- Location: Cecil hills sydney
ZX6rShock
Does any body know if a zx6r 06 model rear shock fits a 03 Z1000?
Cause there is one going for $350.00 @ the wreckers and is in new condition the bike has only done about 1,000 ks.
I know a 03-04 model fit i think straight swap,but not sure on the 06 model
I have checked out rider forum but cant find any info on a 06 shock swap.
Cause there is one going for $350.00 @ the wreckers and is in new condition the bike has only done about 1,000 ks.
I know a 03-04 model fit i think straight swap,but not sure on the 06 model
I have checked out rider forum but cant find any info on a 06 shock swap.
- ttc
- Team Black
- Posts: 2893
- Joined: Fri Nov 19, 2004 2:59 pm
- Bike: Z1000
- State: Queensland
- Location: Brisbane
Re: ZX6rShock
http://www.riderforums.com/showthread.p ... hlight=zx6
05-06 zx6 are the same
My favorite thread on Riderforums
05-06 zx6 are the same
My favorite thread on Riderforums


-
- KSRC Member
- Posts: 190
- Joined: Mon Apr 04, 2005 11:54 am
- Bike: Z1000
- State: New South Wales
- Location: Cecil hills sydney
Re: ZX6rShock
Just read the link and looks like it is not a straight swap
thanks for the link ttc
Wreckers said they will be getting some a 03 shocks comming in
but not sure when.

thanks for the link ttc

Wreckers said they will be getting some a 03 shocks comming in
but not sure when.
Re: ZX6rShock
I've got an 05 shock in mine, just had to put the dust seals from the Z1000 shock in and that was it.
[IMG]http://i50.tinypic.com/2cohlwg.jpg[/IMG]
-
- KSRC Member
- Posts: 190
- Joined: Mon Apr 04, 2005 11:54 am
- Bike: Z1000
- State: New South Wales
- Location: Cecil hills sydney
Re: ZX6rShock
The shock that i was looking at was a 06 model zx6, so was not sure if it was a straight out replacement and according to a link on riders forum its not.
So Petro were do these dust seals fit? and is the 06 shock the same lenght as the Z1000?
Thanks.
So Petro were do these dust seals fit? and is the 06 shock the same lenght as the Z1000?
Thanks.

Re: ZX6rShock
There's 2 little dust seals on the bottom mounting point of the Z1000 shock, I just changed them for the ones on the ZX6r shock.
[IMG]http://i50.tinypic.com/2cohlwg.jpg[/IMG]