GPZ900R

[Godzilla]

Hi people,

Any one know if a current model pipe, such as ZX9R, ZRX, GSXR would fit to a GPZ900R? Can be standard or aftermarket.

It is getting hard to source original pipes and the current ones should be better / lighter anyway.

Slight modifications are OK.

Thanks

[IsleofNinja]

Mine's running a 2 1/4" universal slip on with a custom mid pipe (made my local Carline exhaust shop) in stainless.

Total cost was about $300.00 and has a pretty nice note on her- not too loud yet you know it's there.

You can get later model OEM cans that have a slip joint ie some 600's etc but normally the mounting bracket is not suitable.

(Check ebay for Yoshi cans.. A few around ATM cheap with minor scratches etc which can be polished out.)

You want 2 1/4" inlet (57.5mm) universal fit. If you take bike to local exhaust shop a new mid pipe quick and easy to make for a good exhaust fitter particularly if you remove OEM mid/can for them.

Make sure you get a can with a universal type moveable bracket. Ie you can mount anywhere on the muffler body.

Hope it helps

[Godzilla]

Thanks for that.

Sorry, I should have been more exact. Unfortunately I have no exhaust at all, so would need a complete system. So I am hoping that another bikes system may fit with modifications if necessary.

[IsleofNinja]

You got me curious now!

I might rip me headers off and have a look.. I have a stock 06 zx12R system here .. looks like it might do.. will let you know.

[lifeofcrimeguy]

Staintune will make anything you want if you take the bike into them, I believe.

[Godzilla]

You got me curious now!

I might rip me headers off and have a look.. I have a stock 06 zx12R system here .. looks like it might do.. will let you know.

That would be great.

Staintune will make anything you want if you take the bike into them, I believe.

That is the more expensive option.

I would rather buy something that fits or can be modified to fit second hand.

[Kwak addict]

Post up the measurements of the GeePeeZee exhaust ports (dia, port centre spacing) & distance between bottom of exhaust port & sump & I'll check the stuff I have lying around.
Does the GPZ have the camchain in the middle or on the side?

[Godzilla]

Post up the measurements of the GeePeeZee exhaust ports (dia, port centre spacing) & distance between bottom of exhaust port & sump & I'll check the stuff I have lying around.
Does the GPZ have the camchain in the middle or on the side?

I will do that. Unfortunately I do not have access to the GPZ for a couple of weeks. Camchain is on the left hand side looking at it while sitting on it.

[IsleofNinja]

Cam chain on the left side.