ZX10 SERVICE

For general Technical and Performance Discussions
User avatar
Glen
VIP MEMBER
VIP MEMBER
Posts: 7268
Joined: Mon Apr 18, 2005 10:30 am
Bike: ZRX
State: New South Wales
Location: Kellyville

ZX10 SERVICE

Post by Glen »

After Seraph's post recently on what a 12k service for a 12 is I thought I'd check to see what actually gets done at a 12k service for a 10.

Well surprise,surprise the answer is......not a lot

Apart from a lot of "inspecting" the guts is just an oil and filter change and a little surprisingly new plugs. Now apparently plugs are a real pain in the arse on a 10. Mick at CHM tells me it's a drop the radiator job. Anyone here done the plugs on a 10 as I haven't had the pleasure yet?

The service manual for a 10 is also a little incorrect. It says you don't change the oil and filter at 18,000 :shock: (must be a typo)
It's really all about standing around drinking Dave's beer.
2008 ZRX1200 Greeeeen Roadie
2016 KTM Superduke 1290 Oraaaaange
2016 Seadoo RXTX300
Too many toys.......work is getting in the way!!!!
User avatar
MickLC
Team Crim
Posts: 5429
Joined: Wed Apr 21, 2004 1:04 pm
Bike: Z1000
State: ACT

Re: ZX10 SERVICE

Post by MickLC »

I got up to the 24,000km services done by the shop because it was still under warranty, so I didn't have to do the plugs, shims etc. Now it's out of warranty I'll do most of it myself with the workshop manual. Not 100% sure about the plugs, but I do remember reading that they are a pain in the arse to get at.
'13 Z1000, '76 Z650+,'91 KLR250, '95 ZX6R Racebike
User avatar
MadKaw
Administrator
Administrator
Posts: 9671
Joined: Tue Apr 20, 2004 4:33 pm
Bike: ZX10R
State: New South Wales
Location: Windsor or the Creek..
Contact:

Re: ZX10 SERVICE

Post by MadKaw »

The hardest part is getting the air box out.
I did it to remove the KLEEN and it has to be done in a particular manner as its so tight....
Dave
2010 Z1000
ex bikes
05 ZX-10R Race Bike - No.77
95 ZXR750R M Race Bike - No. 75
98 ZX9R Race Bike - No. 000
zx6r, zx7r, GPX750, GPX500, lots of KX's.
Image
I ride way too fast to worry about cholesterol
User avatar
Wattie
VIP MEMBER
VIP MEMBER
Posts: 10041
Joined: Mon Oct 31, 2005 12:23 pm
Bike: ZX10R
State: New South Wales
Location: Bligh Park

Re: ZX10 SERVICE

Post by Wattie »

hey Glen,
just work out a weekend, we can both Lob at Daves, and drink his beer while he does both of ours for us :lol: :lol: :lol:
Wattie #55
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
User avatar
Neka79
Extreme Post Whore :-)
Extreme Post Whore :-)
Posts: 13115
Joined: Fri Apr 23, 2004 12:20 am
Bike: Z900
State: South Australia
Location: Adelaide......nah its cool..no really!!
Contact:

Re: ZX10 SERVICE

Post by Neka79 »

Wattie wrote:hey Glen,
just work out a weekend, we can both Lob at Daves, and drink his beer while he does both of ours for us :lol: :lol: :lol:
actually my bikes just abt due for a service too... :P
Neka
2006 Zeddy 1000
1996 VS series 2 S pak Ute
Image
hoffy
Team Barge
Team Barge
Posts: 8744
Joined: Sun Oct 30, 2005 10:59 am
Bike: Z1000
State: New South Wales

Re: ZX10 SERVICE

Post by hoffy »

Wattie wrote:hey Glen,
just work out a weekend, we can both Lob at Daves, and drink his beer while he does both of ours for us :lol: :lol: :lol:
If we buy Dave a case of beer, will he do mine too? he's good at workin on the 7RRRR

just an idea ? :lol:
User avatar
MadKaw
Administrator
Administrator
Posts: 9671
Joined: Tue Apr 20, 2004 4:33 pm
Bike: ZX10R
State: New South Wales
Location: Windsor or the Creek..
Contact:

Re: ZX10 SERVICE

Post by MadKaw »

Sure guys, just bring em over and leave em here until I get around to it... :D

Gotta pull the swingarm out of the 7 again this weekend...
Just to replace the bloody chain guard.!! :x :x
Dave
2010 Z1000
ex bikes
05 ZX-10R Race Bike - No.77
95 ZXR750R M Race Bike - No. 75
98 ZX9R Race Bike - No. 000
zx6r, zx7r, GPX750, GPX500, lots of KX's.
Image
I ride way too fast to worry about cholesterol
User avatar
Strika
VIP MEMBER
VIP MEMBER
Posts: 8373
Joined: Tue Feb 01, 2005 8:02 am
Bike: Yamaha
State: Victoria
Location: Melbourne

Re: ZX10 SERVICE

Post by Strika »

MadKaw wrote:Sure guys, just bring em over and leave em here until I get around to it... :D

Gotta pull the swingarm out of the 7 again this weekend...
Just to replace the bloody chain guard.!! :x :x
Yeah they fixed that on later models! You shoulda bought a P or a N!!!!!!! ;)
"I hate to advocate drugs, alcohol, violence or insanity to anyone, but they've always worked for me" Hunter S. Thompson.
There are really only two questions in life. 1.Which way do i go? 2.What is the lap record?
User avatar
Glen
VIP MEMBER
VIP MEMBER
Posts: 7268
Joined: Mon Apr 18, 2005 10:30 am
Bike: ZRX
State: New South Wales
Location: Kellyville

Re: ZX10 SERVICE

Post by Glen »

hoffy wrote:
Wattie wrote:hey Glen,
just work out a weekend, we can both Lob at Daves, and drink his beer while he does both of ours for us :lol: :lol: :lol:
If we buy Dave a case of beer, will he do mine too? he's good at workin on the 7RRRR
I think he will but only on the condition that we stay there to drink the beer while we watch him... :D
It's really all about standing around drinking Dave's beer.
2008 ZRX1200 Greeeeen Roadie
2016 KTM Superduke 1290 Oraaaaange
2016 Seadoo RXTX300
Too many toys.......work is getting in the way!!!!
User avatar
MickLC
Team Crim
Posts: 5429
Joined: Wed Apr 21, 2004 1:04 pm
Bike: Z1000
State: ACT

Re: ZX10 SERVICE

Post by MickLC »

MadKaw wrote:The hardest part is getting the air box out.
I did it to remove the KLEEN and it has to be done in a particular manner as its so tight....

Ah yes, I've had it out a couple of times...there's a real trick to the twist, rotate, stand on your head while balancing a beer on your old fella to get the airbox out and back in again :?
'13 Z1000, '76 Z650+,'91 KLR250, '95 ZX6R Racebike
hoffy
Team Barge
Team Barge
Posts: 8744
Joined: Sun Oct 30, 2005 10:59 am
Bike: Z1000
State: New South Wales

Re: ZX10 SERVICE

Post by hoffy »

Glen wrote:
hoffy wrote:
Wattie wrote:hey Glen,
just work out a weekend, we can both Lob at Daves, and drink his beer while he does both of ours for us :lol: :lol: :lol:
If we buy Dave a case of beer, will he do mine too? he's good at workin on the 7RRRR
I think he will but only on the condition that we stay there to drink the beer while we watch him... :D
in beanbags ! :lol:
User avatar
Wattie
VIP MEMBER
VIP MEMBER
Posts: 10041
Joined: Mon Oct 31, 2005 12:23 pm
Bike: ZX10R
State: New South Wales
Location: Bligh Park

Re: ZX10 SERVICE

Post by Wattie »

well after my little jaunt up to tamworth, my bike is about due for it 12,000km service.

so when we gunna do it Glen??

reckon Dave would mind doing it on fathers Day?? :lol:
Wattie #55
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
User avatar
Neka79
Extreme Post Whore :-)
Extreme Post Whore :-)
Posts: 13115
Joined: Fri Apr 23, 2004 12:20 am
Bike: Z900
State: South Australia
Location: Adelaide......nah its cool..no really!!
Contact:

Re: ZX10 SERVICE

Post by Neka79 »

Wattie wrote: reckon Dave would mind doing it on fathers Day?? :lol:
oh fathers day id a GREAT day for a bbq and a beer....just rock up at dave's and tell him to get the barbie fired up...and make sure the beer's cold.. :P

im *sure* he'd love that...
Neka
2006 Zeddy 1000
1996 VS series 2 S pak Ute
Image
User avatar
Paz
Warming up
Warming up
Posts: 88
Joined: Wed Jun 01, 2005 1:31 pm
Bike: ZX10R
State: Queensland
Location: Gold Coast
Contact:

Re: ZX10 SERVICE

Post by Paz »

The plugs don't need to be changed until the 24,000 km service as they are iridium plugs standard. When it does come time to change you don't have to take the radiator but they are still a pain to get out. You have to remove two bolts from the engine mount and loosen the third so that you can swing the mount out of the way to reach the outer spark plugs, do one side at a time though. Have a look at this pic, don't laugh at my crappy paint skills :P

I forgot to mention the air box is somewhat difficult to remove if you have not done it before. Try and push the intake tubing back into the frame, you don't want to pull this out as its a real pain to get back in. Then have to twist the air box diagonally up and out with a bit of force.

I hope that helps somewhat. :)

Image
Black '06 ZX10R
9.8 @ 144mph
User avatar
Glen
VIP MEMBER
VIP MEMBER
Posts: 7268
Joined: Mon Apr 18, 2005 10:30 am
Bike: ZRX
State: New South Wales
Location: Kellyville

Re: ZX10 SERVICE

Post by Glen »

Thanks lads. I think you're right about the 24,000 Paz, although the original workshop manual says 12,000 I thinks it's a typo, just like th no oil change at 18 :?
It's really all about standing around drinking Dave's beer.
2008 ZRX1200 Greeeeen Roadie
2016 KTM Superduke 1290 Oraaaaange
2016 Seadoo RXTX300
Too many toys.......work is getting in the way!!!!
Post Reply