Various items and bling for Kwakas

Bodywork Modification Discussion.
Post Reply
Ian_zx6r
Newbie
Posts: 25
Joined: Fri Mar 23, 2007 8:31 pm

Various items and bling for Kwakas

Post by Ian_zx6r »

Here are some items i have for Kwakas..

Tank mounted camera bracket.
Mount your video camera straight onto your tank and record your ride.
Fits all zx6r, zx9r, zzr1200, and probably lot's of other models.

If interested post a message, or send an email to sacredblue73@hotmail.com
$80 anodised.
Comes with all bolts.
Attachments
Mounted camera bracket black anodised.jpg
Mounted camera bracket black anodised.jpg (108.11 KiB) Viewed 5559 times
Last edited by Ian_zx6r on Thu Apr 05, 2007 10:22 pm, edited 1 time in total.
Top
Ian_zx6r
Newbie
Posts: 25
Joined: Fri Mar 23, 2007 8:31 pm

Bar ends

Post by Ian_zx6r »

Replacement bar ends. Made from grade 6061 aluminium. Engraved with the "K" logo and highly polished. Can be anodised gold or black.
Comes with replacement M8 bolts.

$20. Natural aluminium
$27.50 Anodised...

Fits all models with an M8 bar end.
Attachments
Kwaka bar end fitted.jpg
Kwaka bar end fitted.jpg (84.17 KiB) Viewed 5558 times
Kwaka bar ends K.jpg
Kwaka bar ends K.jpg (49.83 KiB) Viewed 5558 times
Kwaka bar ends black n green3.jpg
Kwaka bar ends black n green3.jpg (28.31 KiB) Viewed 5409 times
Kwaka bar ends K logo gold w' bolts.jpg
Kwaka bar ends K logo gold w' bolts.jpg (24.2 KiB) Viewed 5408 times
Last edited by Ian_zx6r on Sat May 05, 2007 10:35 pm, edited 1 time in total.
Top
Ian_zx6r
Newbie
Posts: 25
Joined: Fri Mar 23, 2007 8:31 pm

Oil plugs

Post by Ian_zx6r »

Various replacement oil plugs. Made from grade 6061 aluminium and highly polished. Uses same o-ring as origional. Comes with a replacement o-ring.

$20
Attachments
Kwaka oil plug thread.jpg
Kwaka oil plug thread.jpg (47.2 KiB) Viewed 5554 times
Kwaka oil cap hex polished.jpg
Kwaka oil cap hex polished.jpg (49.96 KiB) Viewed 5554 times
Kwaka oil plug slot.jpg
Kwaka oil plug slot.jpg (57.05 KiB) Viewed 5554 times
Top
Ian_zx6r
Newbie
Posts: 25
Joined: Fri Mar 23, 2007 8:31 pm

Headstem plugs

Post by Ian_zx6r »

Made from grade 6061 aluminium and engraved with the "K" logo. Can be anodised gold or black.
Comes with o-ring fitted. Simply pushes into the hole in the headstem to cover the hole and nut.

Suits all zx6r, zx9r, zx10r, zx14r.... should suit other models, i haven't had a chance to measure them up yet.

$12 Natural aluminium
$17 Anodised.
Attachments
Kwaka headstem caps.jpg
Kwaka headstem caps.jpg (49.17 KiB) Viewed 5551 times
Kwaka headstem cap fitted.jpg
Kwaka headstem cap fitted.jpg (95.42 KiB) Viewed 5551 times
Kwaka headstem cap large black n green2.jpg
Kwaka headstem cap large black n green2.jpg (24.9 KiB) Viewed 5405 times
Kwaka headstem cap anodised gold largel.jpg
Kwaka headstem cap anodised gold largel.jpg (53.5 KiB) Viewed 5405 times
Last edited by Ian_zx6r on Sat May 05, 2007 10:37 pm, edited 1 time in total.
Top
Ian_zx6r
Newbie
Posts: 25
Joined: Fri Mar 23, 2007 8:31 pm

Fairing caps

Post by Ian_zx6r »

Replacement fairing caps. Made from grage 6061 aluminium. Can be anodised gold or black.

Comes in set of 6.

$15

Fits zx6r up to 05 model and zx9's...
Attachments
Fairing caps anodised gold.jpg
Fairing caps anodised gold.jpg (56.32 KiB) Viewed 5547 times
Fairing caps drilled.jpg
Fairing caps drilled.jpg (72.76 KiB) Viewed 5548 times
Top
Ian_zx6r
Newbie
Posts: 25
Joined: Fri Mar 23, 2007 8:31 pm

Race stand bobbins

Post by Ian_zx6r »

Made from grade 6061 aluminium. Can be anodised gold or black. comes with M10 fine bolt. Larger diameters for a better location onto the racestand.

$15
Attachments
Race stand bobbin.jpg
Race stand bobbin.jpg (59.98 KiB) Viewed 5545 times
Race stand bobbins anodised gold.jpg
Race stand bobbins anodised gold.jpg (59.81 KiB) Viewed 5545 times
Top
User avatar
Nanna10r
Team Ninja
Posts: 4291
Joined: Wed Jul 14, 2004 10:42 pm
Bike: ZX10R
State: Queensland
Location: Brisbane Australia

Post by Nanna10r »

You do this stuff yourself champ ?, Looks pretty cool. I'll have to line up for some barends in the near future.
"Nan & Pop Racing"
Poppy Hops on .... CBR150 (Superlite) CBR954 "Blade"
Nanna Naps on .... MoriWAKI NSR85 (Motolite) ZX10R "Crim"
We may ride like Old Can'ts, But Phuk we look DOOG !!!!!!
Top
deafwish
KSRC Member
KSRC Member
Posts: 400
Joined: Tue Oct 10, 2006 6:50 pm
Location: Melbourne - S.E.

Post by deafwish »

Hi Ian,
Will the camera mount fit my 2004 Z1000?
I'm keen if so!
Where are you located?
Cheers
Daz.
dgolding@tsn.cc
Muzzy Ti 4 into 1, Power Commander III USB, K&N, Airbox mod, KLEEN delete, Throttle quickener, Vortex -1 front sprocket, Renthal Ultra Low 'bars, Seat cowl, Ohlins 0.95kg fork springs, ZX6R shock. 130hp/ 70ft/lbs!
Top
User avatar
Neka79
Extreme Post Whore :-)
Extreme Post Whore :-)
Posts: 13115
Joined: Fri Apr 23, 2004 12:20 am
Bike: Z900
State: South Australia
Location: Adelaide......nah its cool..no really!!
Contact:
Contact Neka79

Post by Neka79 »

hey mate..do u make up polished clamp cover with the z1000 logo for the zeddy?? only found 1 UK site who do em and they wont return my emails...
Neka
2006 Zeddy 1000
1996 VS series 2 S pak Ute
Image
Top
deafwish
KSRC Member
KSRC Member
Posts: 400
Joined: Tue Oct 10, 2006 6:50 pm
Location: Melbourne - S.E.

Post by deafwish »

Neka79 wrote:polished clamp cover with the z1000 logo for the zeddy...
Polished stuff was cool in the 90's........... :?
Stick with the stock black one IMO! :wink:
Muzzy Ti 4 into 1, Power Commander III USB, K&N, Airbox mod, KLEEN delete, Throttle quickener, Vortex -1 front sprocket, Renthal Ultra Low 'bars, Seat cowl, Ohlins 0.95kg fork springs, ZX6R shock. 130hp/ 70ft/lbs!
Top
User avatar
Neka79
Extreme Post Whore :-)
Extreme Post Whore :-)
Posts: 13115
Joined: Fri Apr 23, 2004 12:20 am
Bike: Z900
State: South Australia
Location: Adelaide......nah its cool..no really!!
Contact:
Contact Neka79

Post by Neka79 »

deafwish wrote:
Neka79 wrote:polished clamp cover with the z1000 logo for the zeddy...
Polished stuff was cool in the 90's........... :?
Stick with the stock black one IMO! :wink:
nah..need a coupla polished bits to match the chain guard....
Neka
2006 Zeddy 1000
1996 VS series 2 S pak Ute
Image
Top
Ian_zx6r
Newbie
Posts: 25
Joined: Fri Mar 23, 2007 8:31 pm

Post by Ian_zx6r »

Pontikat wrote:You do this stuff yourself champ ?, Looks pretty cool. I'll have to line up for some barends in the near future.
Yes i make all these items myself.
I have items for Suzuki's Yamaha's Honda's and Triumph's also.
Top
Ian_zx6r
Newbie
Posts: 25
Joined: Fri Mar 23, 2007 8:31 pm

Post by Ian_zx6r »

deafwish wrote:Hi Ian,
Will the camera mount fit my 2004 Z1000?
I'm keen if so!
Where are you located?
Cheers
Daz.
dgolding@tsn.cc
If the tank mount is the same as many other Kwakas it will fit, we just have to try it.
I am in Dandenong North.
Top
Ian_zx6r
Newbie
Posts: 25
Joined: Fri Mar 23, 2007 8:31 pm

Post by Ian_zx6r »

Neka79 wrote:hey mate..do u make up polished clamp cover with the z1000 logo for the zeddy?? only found 1 UK site who do em and they wont return my emails...
Um, send me a photo of what you want and i'll have a look at it.
send to sacredblue73@hotmail.com
Cheers
Ian
Top
Ian_zx6r
Newbie
Posts: 25
Joined: Fri Mar 23, 2007 8:31 pm

Post by Ian_zx6r »

Spiked bar ends. Made from grade 6061 aluminium and highly polished. Can be anodised gold or black
Bolts straight into Kawkas with an M8 thread.

$30 per set polished aluminium
$37.50 Anodised.
Attachments
Spiked bar end installed.jpg
Spiked bar end installed.jpg (75.87 KiB) Viewed 5491 times
Spiked bar ends.jpg
Spiked bar ends.jpg (59.62 KiB) Viewed 5492 times
Bar end spike barbairian fitted.jpg
Bar end spike barbairian fitted.jpg (30.3 KiB) Viewed 5399 times
Last edited by Ian_zx6r on Sat May 05, 2007 10:41 pm, edited 1 time in total.
Top
Post Reply

Return to “Bodywork & Bling Mods”