Need tools and help!!!!!! - Mt Waverley Vic

deafwish · Post by **deafwish** » Wed Jan 24, 2007 9:02 pm

I'm attempting to change my front sprocket and only have up to a 26mm socket!

I need a big ass breaker bar/ water pipe to break the torque and a 27mm deep socket.
Anyone around Mt Waverley care to help me change it on Friday?
Pleeeeeeeeeease?!
Cheers.
Daz.

The_Brick · Post by **The_Brick** » Wed Jan 24, 2007 9:11 pm

If you cant get anyone come here Moorabbin and i will hit with a rattle gun
should fix it

deafwish · Post by **deafwish** » Wed Jan 24, 2007 9:14 pm

The_Brick wrote:If you cant get anyone come here Moorabbin and i will hit with a rattle gun
should fix it

Thank you the brick!
I'll see how I go.....
Is it at your shop or home?
I will need to swap sprockets and do a wheel alignment whilst i'm there.....?

The_Brick · Post by **The_Brick** » Wed Jan 24, 2007 9:16 pm

At home
but should have all you need i think

deafwish · Post by **deafwish** » Wed Jan 24, 2007 9:21 pm

I'll let you know if I can't find someone closer......
Thankyou very much for the offer!

deafwish · Post by **deafwish** » Fri Jan 26, 2007 11:59 am

The_Brick wrote:If you cant get anyone come here Moorabbin and i will hit with a rattle gun
should fix it

Hi mate!
I tried using a mates 250 foot pound torque rattle gun and it still won't budge!

We even used a massive breaker bar, unsuccessfully!

Is your rattle gun torquier than 250?
If so, I'd love to come by and give it a crack!
Cheers!
Daz.

0414 305 117

The_Brick · Post by **The_Brick** » Fri Jan 26, 2007 12:15 pm

No sorry no bigger
And mate garage is closed at the moment
havent even got abreaker bar long enough here for that pressure

deafwish · Post by **deafwish** » Fri Jan 26, 2007 12:24 pm

No prob's. I appreciate the offer.
Might your mates garage happen to be open tomorrow?

Rossi · Post by **Rossi** » Fri Jan 26, 2007 1:01 pm

This may sound like a daft question BUT

You did flatten the lock washer down first ?????

Lainie · Post by **Lainie** » Fri Jan 26, 2007 1:43 pm

I have a rattle gun etc and u are more than welcome to use my garage and tools if you need. I am in Hampton Park

Felix · Post by **Felix** » Fri Jan 26, 2007 6:10 pm

You may need to give it a sharp whack with a drift...

deafwish · Post by **deafwish** » Sat Jan 27, 2007 10:22 am

Lainie wrote:I have a rattle gun etc and u are more than welcome to use my garage and tools if you need. I am in Hampton Park

Hi Lainie,
Thanks for the offer!
Is your rattlegun torquier than 250 foot pound?
The washer had been flattened.
I had hit it numerous times with a steel block, too!
Bastard thing!!!!!

Lainie · Post by **Lainie** » Sat Jan 27, 2007 10:43 am

Is your rattlegun torquier than 250 foot pound?

Yeap tis 350

PM has been sent, I am off bike shopping this afternoon but have sent you mobile number if u need to use garage while we are out kids can unlock it for you

deafwish · Post by **deafwish** » Sat Jan 27, 2007 11:22 am

PM replied, thanks Lainie!

Lainie · Post by **Lainie** » Sat Jan 27, 2007 11:23 am

No problems at all