Blingectomy for the MFP12

[Neka79]

Mate, I think that looks great. Polished rims look sweet, pipe is a beaut and the chrome mesh is the mutts nuts.

BUT, and I'm going out on a limb here - I think the checherplate a bit average. It probably wouldn't keep all the crap out, but I'd have used the same mesh as in the cut outs.

yea..after another look, i reckon the mesh would look good too...

[Sulli]

looks good except .......
chuck the checker plate its not to your usual standard Gos...........actually it looks tacky
The rear disc looks good any loss in braking performance
Yea yea I know you don't use the back brakes so it's only there for show

[Black Magic]

Very nice Gos!

Good work!

[bassmaniac69]

Very nice mate!

I've been eying off that same RatedR rear rotor for the zed for a while now - I'd love to know what you think of it!

[Gosling1]

Phil you are dead right - it looks *way* better in the flesh, the wheels came up far better than I thought they would. The guys out at the local bike smash-repair joint ( a new subsidiary of CMCC) wanted to know who did the job......and how much would I charge to do a set on a 10 !! A lot of the credit has to go to PC, he did a great number on the Gloss 2-pack black, this really sets the polished rims off.....

OK Ponti, your on. I will send up a template for some of that 'fooly tscik' unobtanium Radector material for that fairing infill......check your mailbox next week.

Don't worry about bagging the checkerplate, I have been told now by umpteen 'observers', that it is crap and I need to flick it ASAP ! Well there you go, one mans chrome checkerplate is another man's arsewipe (ouch). The checker-plate will get the flick when Ponti can knock up a better version........The stock centre piece has a couple of big cracks, and looks way crappier than the c/plate I reckon....

That rear disc works great with the braided line. Normally, putting a braided line on a rear brake can cause the brake to become something of an 'On/Off' switch, unless you bleed some air into the line.

With this brake, because it has less disc material for the pads to grip, you get a bit more pedal-travel than stock. So with the braided lines, it evens out, and the back brake works very well. Sulli - mate, I only used it once or twice to bed the pads in, thats all !!!

Big thumbs-up to the HH pads that were fitted to the front - They work *extremely* well.....highly recommended if anyone is looking to replace front pads.

[ProblemChild]

it s true it looks much better in the flesh

[Nanna10r]

it s true it looks much better in the flesh

I bet you say that too all the boys Mick

[Gosling1]

Hard to blame him when he's got the best man-boobs in the world to perve on....































ahahaahahaahahahaah no picture this time !!!

I got the rearsets yesterday from Thailand, they look great and work even better, and need their own Product Evaluation.....will bung some pics up here shortly.....

[Neka79]

ur lucky gos....

my neighbours heard screaming!!

[Gosling1]

Here's the pic's of those rearsets. I'll do a product evaluation in another thread.....

[Strika]

THey look pretty damn good...................especially compared to your other mods!!!!

[chuffed]

Those mods are lookin great gos..

I know how much difference those wheels must look, i have two 12's one with matt black wheels the other with gloss black centres and the outer polished. The difference is huge and out edges arent anywhere near as hard to keep polished as a full wheel.

Those rearsets look damn horn, look forward to your evaluation.

[Nucci]

Looking good there except for the checkerplate - IMO it looks naff

[Gosling1]

its cool Nucci, the checkerplate has a very limited lifespan - 99% of the feedback so far has been the same as yours. I still wonder what possessed me to buy a roll of checkerplate and bung it on the bike !! Must be OldTimers kicking in early ?

[Neka79]

its cool Nucci, the checkerplate has a very limited lifespan - 99% of the feedback so far has been the same as yours. I still wonder what possessed me to buy a roll of checkerplate and bung it on the bike !! Must be OldTimers kicking in early ?

maybe u wanted to look like a redneck ute driver??