ZX10R Pinging

ZZR 250, 600, 1100 & 1200
User avatar
Glen
VIP MEMBER
VIP MEMBER
Posts: 7268
Joined: Mon Apr 18, 2005 10:30 am
Bike: ZRX
State: New South Wales
Location: Kellyville

Post by Glen »

Shifty

I wasn't having a go mate. Sorry if it came across that way.

Glen
It's really all about standing around drinking Dave's beer.
2008 ZRX1200 Greeeeen Roadie
2016 KTM Superduke 1290 Oraaaaange
2016 Seadoo RXTX300
Too many toys.......work is getting in the way!!!!
User avatar
Gosling1
Team Donut
Team Donut
Posts: 13826
Joined: Mon Jun 20, 2005 9:30 pm
Bike: ZX2R
State: New South Wales
Location: Anarchy Road
Contact:

Post by Gosling1 »

Hi Glen - my own experience with the *hi*-octane stuff out there is that BP Ultimate is exactly that - the pick of the bunch. Unfortunately there are no BP's in my local area, so I generally use the local Mobil oulet, and the Hi-O stuff they sell. The 12 seems to run fine on this, mind you I have only clocked up 500k so far, so not sure what will happen at the 1000k service......will ask the mechanics at the local dealer if there is any jiggery-pokery with ignition timing at the first service (this would surprise me if it was the case.) After having run straight aviation petrol ( some people call it AvGas, it is actually just aeroplane fuel :wink: ) with a nominated RON of 105-110, I can happily say that nothing else sold out of a pump even comes close. It is a true hi-octane fuel ( sadly for track use only). If your bike has since stopped pinging under similiar conditions, you probably just copped a bad batch of fuel. This happens even with the best distributors from time to time. If you catch it in time ( ie straight after fill-er-up mate,) then throw in a bottle of octane-booster. Not recommended on a regular basis, but will help with a tank of shit fuel that has your bike pinging where it didn't ping before.

Here is a Fact of Life - every single Z1000Mk11 sold in Australia had its ignition timing retarded almost 5 degrees from stock, prior to being shipped here. Apparently the factory got wind of the shit fuel sold in Australia, and wound the timing back to cope. You cannot tell this from the standard timing marks near the ignitor coils, they *look* just fine. They run much better with this corrected. Wonder if much has changed in the last 25 years ???

regards
KwakkaDave
".....shut the gate on this one Maxie......it's the ducks guts !!............."
Post Reply