1991 ZZR600 Idle level

General Discussion
Post Reply
tersaki600
Newbie
Posts: 1
Joined: Sat Dec 10, 2016 4:02 pm
Bike: ZZR600
State: Victoria

1991 ZZR600 Idle level

Post by tersaki600 »

Hi all,

Have just had my bike serviced & feel that it is idling to high.

The sound & vibration is great but the fuel economy sucks big one.

Am going to be heading on a highway trip in the coming weeks.

Is there a standard idle level?

Currently idling about 1650 revs.

Appreciate your assistance.

T
User avatar
BrettZZR
VIP MEMBER
VIP MEMBER
Posts: 619
Joined: Fri Apr 13, 2012 4:44 pm
Bike: ZZR1100
State: Western Australia
Location: Perth

Re: 1991 ZZR600 Idle level

Post by BrettZZR »

There should be a knob you can twist on the left of the bike to set it down. I'll look it up when I'm home, but I'm thinking 900 is more like it.

Oh, and fast idle will not affect fuel consumption to a great extent - you'll need to find what's up with that...
Jl4043
Newbie
Posts: 22
Joined: Fri Mar 20, 2015 3:35 pm
Bike: ZX9R
State: Victoria
Location: SE Gippsland

Re: 1991 ZZR600 Idle level

Post by Jl4043 »

1300 rpm plus or minus 50 (1250-1350) with the engine warmed up. If your choke slide is sticky it can cause a high idle and more fuel consumption.
Check that the choke is all the way off at the carbs, then adjust the idle down and see how it goes.
Post Reply