408HP ZX12R Turbo

[robracer]

From Australian bike builders Extreme Creations,
there seems to be a lag before it screams its head off, almost like wheelspin? can anyone explain what would cause this?

[Wattie]

Looks to me it's when the boost controller starts bleeding off the excess boost.

[Torquewrench]

Fark.

[robracer]

excess boost

[Wattie]

It's a massive turbo, it spools up quick then once it hits the desired boost it smooths out.

[dutchy]

I love the looks on his face every time the numbers come up, also, I was yelling at that prick to get out of the way halfway through the vid

[shadowzx9]

And Stock brakes.....

[Wattie]

And Stock brakes.....

And the early model 12 brakes too.

[Kwak addict]

The owner of the 12 had a Mr. Turbo kit fitted, making over 250 HP but he wanted to do landspeed stuff & his goal is to do 400 km/h so he asked Ben (Mr. Extreme Creations) to build him a 400+ HP motor... mission accomplished I'd say !
The engine internal specs read like a who's who of high performance component manufacturers & all the turbo manifolding & plenum chamber was done in house by Ben - it's a SERIOUS engine as you can see.

Imagine what it would be like to ride !!

[Wattie]

It'd be a big pussy cat untill about 3000rpm.
Then farrrrrrrrrrk!

It wouldn't drive properly untill 6th gear. The rest would be wheelies and burnouts

[MAXUMIS]

Awesome setup , It more than likely is the Muzzy 1317 block for strength to make them numbers amongst other things , saying that you would need a serious set off balls to give it everything . PS it maybe having a bit of boost "spike" to cause what its doing on the dyno.

[Smitty]

And Stock brakes.....

And the early model 12 brakes too.

nothing wrong with them...

[Smitty]

The owner of the 12 had a Mr. Turbo kit fitted, making over 250 HP but he wanted to do landspeed stuff & his goal is to do 400 km/h so he asked Ben (Mr. Extreme Creations) to build him a 400+ HP motor... mission accomplished I'd say !
The engine internal specs read like a who's who of high performance component manufacturers & all the turbo manifolding & plenum chamber was done in house by Ben - it's a SERIOUS engine as you can see.

Imagine what it would be like to ride !!

...fun at traffic lights too

[Jonno]

And Stock brakes.....

And the early model 12 brakes too.

2003 model and brakes only slow ya down

Turbo Busas get 300-500hp regularly, and is a lot easier to achieve than with 12R's

[Gosling1]

hmmm I like it