Coloured Plates Warning

[smithy5]

I was pulled over yesterday by an RBT unit and whilst I had a reading of zero, the copper asked me if my bike was registered as the label said Oct 2012.
My response was, that to my knowledge you don't have to display the label no more. He said , that's not the case, 'till they send it you have to display it.
Until then it's a fine-able offence ( I didn't get fined )
The no label will come into full effect next year.

Lucky boy Pete. I would get rid of the old label quick smart. It is an offence to display an expired label more so than no label at all.

Jan 1st is the date for no label. Put it in your pocket till then and say it just fell off.

[KEL10R]

If your running a fender eliminator and have a rego tube at the bottom of your plate, they are more prone to breaking; had it happen twice, relocated the rego tube problem solved.

You dont have to worry about rego labels now as they have been shit canned.

Yeah i had my rego tube at the bottom of the plate so this may of been part of the problem,still the metal is quite soft, i actually asked the bloke at the RTA about not having to display the rego as he issued me a new one with the new plate and it is from January 1,2013 and applies to all vehicles under 4.5 tonne, i'm just gonna stick the new one under the passenger seat for the next 12 Days

[koyote]

Before you fit your new plate coat the back with thiiiiick layer of silicon usually called selastic

[koyote]

Before you fit your new plate coat the back with thiiiiick layer of silicon usually called selastic

[SNAFU]

Guy's I get a bit of vibration off the Z1000. I now have drilled a couple extra holes and zip tied the plate as well. KEL10R thanks for the info.

Cya Dutchy