Help please, bike not revving past 10k

[AznCruiser]

Will definately be getting the servo buddy...................the problem is that shipping from the US takes ages.

I might have to visit Jay Car and make one up ............

[Blurr]

Yep I should have asked you that when you said you heard a whine, it was sitting in the back of my head that you may have mixed them up.

Anyways a servo buddy is $75 including postage from eBay for your model if you can't make it yourself.

They have a habit of dying. Remember the ecu doesn't know whether you have a slip on or not it just say that it 'thinks' the valve is still closed because the servo is saying it can't open it which is because you still have the servo tricked into thinking its still doing it job. Therefore ecu thinks the valve is closed and won't let the bike rev.

[AznCruiser]

Heheheh Blurr im easily confused mate , master of confusion should be my middle name .

Yeah I dont mind paying the money but I dont like the wait, so if I could get them locally then id definitely go that route.

But it seems like its just an American thing ............

[Maddog]

http://www.ebay.com.au/itm/Kawasaki-Ser ... 1c27623c5f

Didn't take long at all to ship
Although I did get mine a while ago with free shipping, so was a lot cheaper back then.
Where are you located? Send a PM with your details.
If you're close you could try mine to see if this is the problem.

[EDU]

If the servo from the 09 model works on a 05/06, you're welcome to have mine whilst you wait for your servo buddy... Pretty that thing will never go back on my bike!

[Blurr]

They should fit as the servo buddy is the same for both models

[AznCruiser]

If the servo from the 09 model works on a 05/06, you're welcome to have mine whilst you wait for your servo buddy... Pretty that thing will never go back on my bike!

Thanks for the offer mate, but ill try going the servo buddy route at the moment.........your right though, it frees up a bit of space under there. I recon I could fit a yummy sandwich under there

[AznCruiser]

http://www.ebay.com.au/itm/Kawasaki-Servo-Buddy-ZX6R-2005-2006-FI-Light-Eliminator-05-06-Ninja-ZX-R-6R-636-/120919833695?pt=Motorcycles_Parts_Accessories&hash=item1c27623c5f

Didn't take long at all to ship
Although I did get mine a while ago with free shipping, so was a lot cheaper back then.
Where are you located? Send a PM with your details.
If you're close you could try mine to see if this is the problem.

Thanks for coming over Maddog, was great to put a face to the name, and great to know that the Servo Buddy solved the issue ................

Thanks everyone for all the help and suggestions and offers......very much appreciated .

[Maddog]

http://www.ebay.com.au/itm/Kawasaki-Servo-Buddy-ZX6R-2005-2006-FI-Light-Eliminator-05-06-Ninja-ZX-R-6R-636-/120919833695?pt=Motorcycles_Parts_Accessories&hash=item1c27623c5f

Didn't take long at all to ship
Although I did get mine a while ago with free shipping, so was a lot cheaper back then.
Where are you located? Send a PM with your details.
If you're close you could try mine to see if this is the problem.

Thanks for coming over Maddog, was great to put a face to the name, and great to know that the Servo Buddy solved the issue ................

Thanks everyone for all the help and suggestions and offers......very much appreciated .

No problem at all mate...Happy to help a fellow KSRC member in need.
Glad it was something as simple as the guys had suggested..(Dead Servo)..

[AznCruiser]

http://www.ebay.com.au/itm/Kawasaki-Servo-Buddy-ZX6R-2005-2006-FI-Light-Eliminator-05-06-Ninja-ZX-R-6R-636-/120919833695?pt=Motorcycles_Parts_Accessories&hash=item1c27623c5f

Didn't take long at all to ship
Although I did get mine a while ago with free shipping, so was a lot cheaper back then.
Where are you located? Send a PM with your details.
If you're close you could try mine to see if this is the problem.

Thanks for coming over Maddog, was great to put a face to the name, and great to know that the Servo Buddy solved the issue ................

Thanks everyone for all the help and suggestions and offers......very much appreciated .

No problem at all mate...Happy to help a fellow KSRC member in need.
Glad it was something as simple as the guys had suggested..(Dead Servo)..

Ordered the servo buddy . Yup was a simple fix after all, but learnt alot of things from this which is great...............

[AznCruiser]

Nope it wasnt the servo buddy, I was too ahead of myself when the bike revved slightly higher standing still.......the servo buddy was a good buy though, now my dash doesnt look like a Christmas tree.

Anyway, less than two weeks ago I scored myself a Power Commander III for $149, needless to say I was a happy boy ..........installed it tonight and whadya know, the bike now sounds smoother and revs butterly smooth to revline. It now feels like going from a LAMS bike to a fulls bike ...........

It seems that the culprit was a DEAD ECU.........yay problem solved, now I can ride .

Thanks for all the help guys.........much appreciated. Learnt heaps in the process.

[98ninja]

I had a similar problem. Wouldnt rev past 10k
its called a buell.........................

[Blurr]

Pc3 doesn't replace the ecu it just over rides the fueling. Something else is going on. I cant imagine that an ecu just drops its maps and nothing else

[AznCruiser]

Whatever it was, its fixed now ................i gotta find some other thing to fix now to get out of house work

[Wattie]

Hmmm weird...
I'm with Blurr but.

What did the codes say after you installed the servo buddy?