FRIDGE MECHANIC
-
StuMiller
- KSRC Contributor
- Posts: 1360
- Joined: Thu Jun 22, 2006 12:02 pm
- Bike: ZX6R
- State: Tasmania
- Location: Hobart, Tasmania
Re: FRIDGE MECHANIC
If you can get some R12, get me some too so I can bury it an make a fortune later!
2007 ZX6 - Road bike
Re: FRIDGE MECHANIC
Ok sounds like it shouldn't be too difficult to solder then.
Make sure you clean the area right up with emery paper so it looks like brand new copper before you attempt to weld it up,don't breath in the smoke that will come off it. There will be refrigerant still trapped in the oil in the system and as it heats up it will boil it off and create a toxic smell.
Good luck with the R12
Let me know how it goes.
Make sure you clean the area right up with emery paper so it looks like brand new copper before you attempt to weld it up,don't breath in the smoke that will come off it. There will be refrigerant still trapped in the oil in the system and as it heats up it will boil it off and create a toxic smell.
Good luck with the R12
Let me know how it goes.
Re: FRIDGE MECHANIC
Hey Gos how's your old sticker cabinet going?