The photo shows what I mean! These are my spare callipers though so don't worry, my running ones are much cleaner!
- ImageUploadedByTapatalk1348397288.122316.jpg (31.34 KiB) Viewed 2565 times
What are these for?
What are these for?
Protruding from the ends of my callipers pistons is a red material; what is this for, can I remove it and how?
The photo shows what I mean! These are my spare callipers though so don't worry, my running ones are much cleaner!
The photo shows what I mean! These are my spare callipers though so don't worry, my running ones are much cleaner!
Road, Sky, Road, Sky, Road..... Ambulance
1993 ZXR750 Track Bike
1994 ZXR750 Ongoing project
1993 ZXR750 Track Bike
1994 ZXR750 Ongoing project
-
Wattie
- VIP MEMBER
- Posts: 10041
- Joined: Mon Oct 31, 2005 12:23 pm
- Bike: ZX10R
- State: New South Wales
- Location: Bligh Park
Re: What are these for?
Looks like busted up old pads or dried out any squeal goo.
Pistons are hollow. You should be able to clean that out. And be left with a big hole.
Pistons are hollow. You should be able to clean that out. And be left with a big hole.
Wattie #55
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
-
Wattie
- VIP MEMBER
- Posts: 10041
- Joined: Mon Oct 31, 2005 12:23 pm
- Bike: ZX10R
- State: New South Wales
- Location: Bligh Park
Re: What are these for?
I'd be using a screw driver. Make sure you don't damage the smooth part of the pistons.
Wattie #55
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
Re: What are these for?
Another job for the trusty Dremmel then!
Road, Sky, Road, Sky, Road..... Ambulance
1993 ZXR750 Track Bike
1994 ZXR750 Ongoing project
1993 ZXR750 Track Bike
1994 ZXR750 Ongoing project
-
Kev
- VIP MEMBER
- Posts: 435
- Joined: Tue Jun 02, 2009 12:43 pm
- Bike: ZX9R
- State: New South Wales
- Location: Wollongong
Re: What are these for?
They are bakelite inserts that act as a thermal insulator and are suppose to be there, so I wouldn't go pulling them out if I were you. The older 4 pot Tokico calipers on the ZX9 and ZXR750 all had these solid pistons.
-
born green
- KSRC Contributor
- Posts: 1491
- Joined: Sun Aug 07, 2011 6:59 am
- Bike: ZX10R
- State: Victoria
- Location: blind bight vic
Re: What are these for?
Yep, dont take em outKev wrote:They are bakelite inserts that act as a thermal insulator and are suppose to be there, so I wouldn't go pulling them out if I were you. The older 4 pot Tokico calipers on the ZX9 and ZXR750 all had these solid pistons.
96 ZX7R roady
07 ZX10R tracky. to many mods to list here!
95 tickford XR6,
SO MANY KAWASAKI'S SO LITTLE TIME
07 ZX10R tracky. to many mods to list here!
95 tickford XR6,
SO MANY KAWASAKI'S SO LITTLE TIME