Freeway riding/constant revs

Discussion area for Newer Riders and LAM's bikes including the Ninja 250

Moderator: Six Addict

Post Reply
User avatar
Trox
KSRC Member
KSRC Member
Posts: 167
Joined: Wed Apr 27, 2011 9:39 pm
Bike: Z750
State: New South Wales
Location: Wollongong

Freeway riding/constant revs

Post by Trox »

Today I rode to a course in Para from the Gong, as such I was on the Freeway and Motorway a fair amount of the trip and found myself at a fairly constant rev, I intend on riding more on the Freeway to work as well.

With this in mind and having just finished breaking in my 250, albeit a contraversial subject, one thing seemed to be common in people thoughts was that whilst breaking in you should avoid riding at constant revs (which I did....pretty well anyway :? ).

Does this apply after break in as well? (hope I didn't open up the "break-in can'o'worms")
Is there an optimum or preferred rev range to sit in (obviously I can change up or down gears to sit at a lower or higher rev rate)?

Thanks
Road; 08 Z750
Track; 02 ZX6
User avatar
P4nza
KSRC Contributor
KSRC Contributor
Posts: 1588
Joined: Sun May 04, 2008 6:28 pm
Bike: Don't have one
State: New South Wales
Location: Somewhere between EC and OPH >:D

Re: Freeway riding/constant revs

Post by P4nza »

You'll be fine mate ;) my 09 ninja 250 has survived 42000+ kms so far and thats mainly road riding( hwy, fwy, twisties, track)... :kuda:
2009 Kwaka Ninja 250R (Charlotte) Roady SOLD :'(
2010 Kwaka Ninja 250R SE (Jenny) Tracky SOLD :'(
Now i got no kwakas to ride! :\

"...I thought my tongue was longer than that!"

Team Crashed 2010 angry9.gif
User avatar
potta9
Warming up
Warming up
Posts: 69
Joined: Sat Aug 28, 2010 10:15 am
Bike: Z1000
State: New South Wales

Freeway riding/constant revs

Post by potta9 »

With modern engines and oils of today your bike Will run fine at a constant rpm it's only competition ( Mx and enduro) bikes that don't like to be held at constant rpm for long periods of time. Top gear and go for it mate
User avatar
Blurr
Apprentice Post Whore :-)
Apprentice Post Whore :-)
Posts: 7246
Joined: Wed Apr 02, 2008 10:31 pm
Bike: ZX10R
State: New South Wales
Location: Stockton

Re: Freeway riding/constant revs

Post by Blurr »

Mate that engine is indestructable. Has been around for donkey's years and will probably be still around after we have perished

You'll be fine ;)
Chariot of Fury 50cc 2stroke Race bike
Team Gumby in red
SAM & SRT Survived
User avatar
UncleChopChop
KSRC Member
KSRC Member
Posts: 221
Joined: Fri Aug 22, 2008 9:58 pm
Bike: ZRX
State: Tasmania
Location: Tasmania

Re: Freeway riding/constant revs

Post by UncleChopChop »

Revs should be a constant 16K rpm in 6th gear on those little things. Keep up the good work :D
User avatar
Trox
KSRC Member
KSRC Member
Posts: 167
Joined: Wed Apr 27, 2011 9:39 pm
Bike: Z750
State: New South Wales
Location: Wollongong

Re: Freeway riding/constant revs

Post by Trox »

Ah sweet, nothin to worry bout, thanks guys

16k in sixth, I like the sound of that :twisted:
Road; 08 Z750
Track; 02 ZX6
User avatar
fireyrob
KSRC Addict
KSRC Addict
Posts: 4828
Joined: Wed Mar 12, 2008 10:13 am
Bike: Z1000
State: New South Wales
Location: Ashfield

Freeway riding/constant revs

Post by fireyrob »

Trox wrote:Ah sweet, nothin to worry bout, thanks guys

16k in sixth, I like the sound of that :twisted:
That motor is as strong as any! Powerful No but built to last yes :D And that little 250R is good for a 2.05 at Eastern Creek on a trackday ;) So dont stress that bike is built tough and will withstand whatever u throw at it :D
09 ZX6R
03 Zthou
User avatar
P4nza
KSRC Contributor
KSRC Contributor
Posts: 1588
Joined: Sun May 04, 2008 6:28 pm
Bike: Don't have one
State: New South Wales
Location: Somewhere between EC and OPH >:D

Re: Freeway riding/constant revs

Post by P4nza »

fireyrob wrote: And that little 250R is good for a 2.05 at Eastern Creek on a trackday ;)

Really?? i should time myself next time!! :D
2009 Kwaka Ninja 250R (Charlotte) Roady SOLD :'(
2010 Kwaka Ninja 250R SE (Jenny) Tracky SOLD :'(
Now i got no kwakas to ride! :\

"...I thought my tongue was longer than that!"

Team Crashed 2010 angry9.gif
User avatar
Trox
KSRC Member
KSRC Member
Posts: 167
Joined: Wed Apr 27, 2011 9:39 pm
Bike: Z750
State: New South Wales
Location: Wollongong

Re: Freeway riding/constant revs

Post by Trox »

fireyrob wrote:
That motor is as strong as any! Powerful No but built to last yes :D And that little 250R is good for a 2.05 at Eastern Creek on a trackday ;) So dont stress that bike is built tough and will withstand whatever u throw at it :D
Good to know, I gave it a bit today, got my toe down for the first time too going through Mac pass, ha freaked me for a split second then a feeling of joy came over as I realised it was my toe cause I "leaned the farker!" :kuda:

Wouldn't mind gettin to the track but think i might go watch and listen for a few times first

Thanks guys :)
Road; 08 Z750
Track; 02 ZX6
Post Reply