Help! - Older 6 & 9 owners

[matchan]

I believe many of the 9's and 00-02 6's have 4 pot front brake calipers, as I'm looking at replacing the 6 pot tokicos on fluffy, just curious if they'd fit, is anyone with one of these able to measure the caliper bolt spacing (centre to centre) and post up?

I think the 99-03 gsxr 600s ahve them as well, but I'm sure no one would have one of those

Cheers
Matt

[Phil]

The F model 9 had the 4 pot nissin's, as opposed to the 6 piston Tokico's that the 98-01 models had.

I just happen to have a set of those 4 piston jobbies on the garage floor ATM

[Six Addict]

you'll need 03 onward 6s matt.. the j series and a models have the same 6 potters you have...

[Phil]

you'll need 03 onward 6s matt.. the j series and a models have the same 6 potters you have...

03 Onward 6's had radial calipers, they wont fit on your forks without adaptors.

[Six Addict]

well that rules out all zx6rs then

[Wattie]

ah yes, they were on the Z1000's aswell.

Obviously why Phil has them...

they were great brakes!

[matchan]

The F model 9 had the 4 pot nissin's, as opposed to the 6 piston Tokico's that the 98-01 models had.

Cheers mate

I just happen to have a set of those 4 piston jobbies on the garage floor ATM

off your 9? any chance you can measure them? My 6's tokicos are 90mm centre to centre. If they're the same care to part with them?

Matt

[Phil]

The F model 9 had the 4 pot nissin's, as opposed to the 6 piston Tokico's that the 98-01 models had.

Cheers mate

I just happen to have a set of those 4 piston jobbies on the garage floor ATM

off your 9? any chance you can measure them? My 6's tokicos are 90mm centre to centre. If they're the same care to part with them?

Matt

Nah, off the Z1000 like Watiie said.

I'll duck out and measure them as soon as I finish this cuppa - while big Al is here to assist with a steady hand

And I'm sure we can arrange something mate