Bling For ZRX1100

[clanga61]

Can anyone point me in the direction of sites where i can find stainless header pipes to fit standard muffler,sport levers(brake&clutch)front&rear rotors,anyother bling, Cheers Clanga

[rooster]

Calling Phil, Phil are you there, calling Phil, you could also have a look at ZRXOA website in the states very good informative and reasonable easy people to deal with.
And you know you really want a Kerker and some Ohlins and forget the standard stuff

[IanH]

I know these items may not be suitable but at least I got in before Phil...
I have a complete standard full system from a 2008 ZRX1200 (5,500k's) which i have no idea if it will fit an 1100... That will be your call. I also have a set of standard rear shocks of same km's if you are interested... Price will definitely be less than a Kerker and Ohlins (but not as much fun, I know).
Let me know if you have a any interest.
IanH

[Errol]

Can anyone point me in the direction of sites where i can find stainless header pipes to fit standard muffler,sport levers(brake&clutch)front&rear rotors,anyother bling, Cheers Clanga

Pretty sure your std header pipes should be stainless, not sure what grade, but they where listed as S/S when I bought my 2001 model new...........

Brake Rotors, I bought my Kagazumi wave rotors from http://stores.ebay.com.au/sandybikespares on e-bay. Well priced, especially with the strong aussie dollar against the pommy pound. Good service, good quality rotors.

Levers - I think Super bike spares were advertising Pazzo's @ a good price on this forum Pazzo levers $199.95 (Pair) online at http://www.superbikesupply.com.au back in March.........

For the rest ZRXOA - http://zrxoa.org/forums/forumdisplay.php?f=99

Happy blinging

[clanga61]

Thanks for the reply guys,headers on the 99 arnt stainless and the reason i only want the headers is because i modified the standard can and bulldoged it,looks good, sounds good, tuned with stge 2 kit good,SHIT its all good,any way just wanting to bling the beast up a bit,motor gets a new life next winter so by next summer, well,lets wait and see. Thanks Cheers Clanga

[Phil]

Thanks for the reply guys,headers on the 99 arnt stainless and the reason i only want the headers is because i modified the standard can and bulldoged it,looks good, sounds good, tuned with stge 2 kit good,SHIT its all good,any way just wanting to bling the beast up a bit,motor gets a new life next winter so by next summer, well,lets wait and see. Thanks Cheers Clanga

The 1200 headers Ian has will fit the 1100, same engine just bigger bore.

As mentioned, ZRXOA has a multitude of memebers that make excellent quality kit for the ZRX. Kwick from ELS (Expensive Lightweight Shit) has galfer rotors, you missed the July specials

Other KSRC site sponsors are also helpfull, superbike supply, kaneg and Flywheels to name a few

[bonester]

One thing to watch is that the 1100 and 1200 muffler mountings are different to the headers. Maybe a complete stock 1200 system would be the go? I have a slightly scratched 1200 stock muffler that I'd sell cheap. I blinged my ZRX lately with mainly ebay and ZRXOA bits- ebay new Ohlins shocks $1400 incl postage from US, $80 clear taillight ebay, $26 pickup spools chrome ebay, $110 for Champs crash knobs incl post ZRXOA.

[IanH]

Clanga,
Its up to you but my stock 1200 system is as new... your choice.

[Nelso]

I've got a full standard system from an '08 that is in perfect condition hanging in the garage too.

[Whickle]

ZRXOA is without a doubt the best place to start looking for bling and finding out who/where to buy it. Just watch some places that have cheap parts but rip off shipping.

I have purchased a bit of gear from the guys on ZRXOA. Dave Dittner for general running gear (Sprockets, Clutch and service parts), Greg Crouch for bling (Fork Brace), KWIK for the tentioner fix....

Bar end mirrors can be purchased from one of the sponsors here AustSales - Direct

[Phil]

Bar end mirrors can be purchased from one of the sponsors here AustSales - Direct

Yes they can, but I am yet to see anything that rivals the quality of Jason7019 from ZRXOA, his mirrors are brilliant

Just ask the many guys here that have them . They are based the on the original "crispy" design, a large majority of the OA have mirrors of this type as well.

In fact they are so go I have them on both my bikes AND a spare set in the cabinet - no they are not for sale

[clanga61]

Hey thanks everone,and oh i got a bit ahead of myself,i meant chrome header pipes not stainless sry F*#_*_$ IDIOT,anyway found a ebay site by accident dont know if its pommy or where its from but its got shit loads of REX gear. Cheers Clanga

[bonester]

Maybe you should bling it up with a TOWBAR....

[clanga61]

Now u know ive already done that dude.