US ECU into Aus ZX636 05/06

[Steptoe]

I'm after info on the wiring mods to put the US ECU into the Australian Wiring Harness on a ZX636 05/06. I had the info some time ago but have since misplaced it. From memory one pin needed to be grounded and another pulled up to 12V (switched?). Anyone help?

[zxsixr03]

Jump on kawiforums.com biggest Kawasaki community around, they will have the answer...

[Steptoe]

Pretty sure I discussed with someone on here a while back. No bother as have just sourced a US wiring harness too.

[cloudnine9]

don't know why you would want to do this as thw US ecu will cut you hp by 5-8hp
watched a guy do the mod on you tube to bridge the ecu to get the eruo/asian map thats in the ecu allready.
used gitar wire.

cloud 9

[Steptoe]

don't know why you would want to do this as thw US ecu will cut you hp by 5-8hp
watched a guy do the mod on you tube to bridge the ecu to get the eruo/asian map thats in the ecu allready.
used gitar wire.

cloud 9

But it'll make more hp than the Oz ECU without a key
US= No K.I.S.S. Immobilser
The difference can be bridged out, and doesn't really matter if you drop in a PCIII.