ZX12R wiring diagram

[greenman43]

Wondering if anyone can help please, a mate of mine is fitting a quick-action throttle to his GSXR 1000 (not everybody has good taste …). He’s looking to copy what I’ve done, which is to fit a ZX12 RH switchblock and ditch the throttle assembly.

What I’m looking for is for someone with access to a wiring diagram (preferably B3 or later) to look and tell me which colours are the two wires used for the killswitch.

Thanks in advance,
Brian

[Smitty]

have it at home...can look it up tonite if that helps

[greenman43]

have it at home...can look it up tonite if that helps

Thanks Smitty, that'd be very much appreciated.

Cheers,
Brian

[Smitty]

have it at home...can look it up tonite if that helps

had a look see in the library in my garage

i found the service manual for the A1 and A2 models ...but not the B1-B3 (it IS out there somewhere)

anyhow the A1-A2 manual shows 6 wires from theswitchblock-
2 for the brake light switch, 2 for the starter circuit and 2 for the engine stop
the Engine stop are BOTH shown as colour R/W...that is Red/white

hope that helps at the moment (will have another look tomorrow nite...there are about 60-70 manuals to sort thru )

[greenman43]

Thanks Smitty, I think we should be right - I'll give him the colour and see how he gets on. I went to look at my own tonight, to discover that I'd heatshrunk it over ...

Cheers,
Brian

[Smitty]

............ I went to look at my own tonight, to discover that I'd heatshrunk it over ...

Cheers,
Brian

ouch....

[Gosling1]

I had a look on google earlier.....and could only find B&W diagrams !!!

[greenman43]

I had a look on google earlier.....and could only find B&W diagrams !!!

I think they're all in B&W now, unlike the good old days when a manual had a beautiful colour-coded wiiring diagram included. Mind you, looms are so intricate now maybe the cost of colour ink has killed it

[Smitty]

I had a look on google earlier.....and could only find B&W diagrams !!!

Gos you want me to post up the page for the Kwaka manual???

maybe then better not coz.....
you need glasses binoculars and a magnifying glass to read them (yes its B&W) coz its all on one spread page
and I found it hard to read even though I have 20.20 vision!

[Gosling1]

if you want to mate - maybe just scan the bastard, and then stretch it by 100% ?? that will make it easier for us old blokes to read eh ?? btw I am sure I have a colour diagram somewhere.......

[bonester]

You could get a multimeter and check the continuity of the two wires you suspect are the right ones- a test with kill switch on and off will confirm which wires they are.

[greenman43]

He could indeed, but not much point if someone has easy access to the info

Cheers,
Brian

[Smitty]

if you want to mate - maybe just scan the bastard, and then stretch it by 100% ?? that will make it easier for us old blokes to read eh ?? btw I am sure I have a colour diagram somewhere.......

scanned AND stretched!




got ya glasses on?