My 9 - A work in progress...

[macca]

I picked this up (there are other threads but here's another one) a few weeks ago, and the list of things to do is finally taking shape. Here's the starting point again...

Isn't it pretty...

[macca]

The first thing we did was went shopping for some new horns. These should do the trick:

ahorns 001.jpg (123.58 KiB) Viewed 1924 times

ahorns 002.jpg (131.32 KiB) Viewed 1924 times

Tony made a little bracket out of steel that bolts to the top radiator mounts, they don't interrupt too much airflow and they should clear the mudguard on full compression...

ahorns 005.jpg (106.12 KiB) Viewed 1923 times

One little telltale wire to the relay is the only sign (other than the big fuck off horns) that anything has changed:

ahorns 007.jpg (99.72 KiB) Viewed 1919 times

Next time you see me ask me for a toot, or if there's popular demand I'll whack something on tubeface. Despite the filenames they're not air horns just little elecrtic jobbies, the only thing in the box is the two horns.

Honk honk...

[macca]

The next thing that had to go was the 'orrible rear fender, we picked up a second hand one locally and set about making the rear end look cleaner:

afender elimination 002.jpg (137.09 KiB) Viewed 1911 times

Muchos betteros...

afender elimination 007.jpg (99.37 KiB) Viewed 1909 times

[robracer]

Elimination looks great .... for the horn replacement I have been told that ones out of beemers are the go Honkety honk

[MickLC]

Tidy work on the fender eliminator, much cleaner than the stock one.

If you want to pull the indicators in a bit closer in I seem to remember there was a way you could move the spacer onto the inside of the fender so it still looked stock but neater and could be reversed later on if you needed.

[ducati_paul]

Isn't it pretty...

God no! that's HIDEOUS!
Oh! You're talking about the bike! sorry, I thought you were talking about the bloke in the green shirt in the background!
Yeah the bikes great!

[waynemorgan]

Lookin' good! Nice work on the FE.

Looks like a really sweet ride

[Whickle]

Nice work on the FE, Looks Great Macca.

As for the horns, it would have been better to get louder zorst

[macca]

I like the loud horns, for under fifty bucks it's way easier and healthier for the bike to lay on the horn button than anything to do with exhaust noise. Check it out...

[robracer]

Good work Bogan

[Strika]

Look......it hasn't been said yet in this thread.........and I suppose someone had to..........gotta love the 9!

[Six Addict]

umm guys... dont mean to alarm you too much, but you're front wheel is either on backwards or they fitted the tyre the wrong way round...

[macca]

Well spotted Pinchy, the tyre is indeed on backwards .

The question is, have Bikebiz Granville just put it back on backwards after fitting the new tyre or has the tyre been fitted backwards on the rim? Have had a look and the cast writing is on the left on the rear wheel (the right side of the spokes are smooth) and on the right side on the front. Is the wheel reversible and they've just cocked up it when they put it back on?

Phone call on Monday could be a good idea me thinks.

[Six Addict]

i think the wheel should have an arrow too, but it may not matter... the tyre should deffo not be ridden backwards

[robracer]

The directional arrow can be seen on the rim in the second Pic, towards the top front