chain and sprox

Z, ZRX, ER & other naked bikes. Get naked in here.!
Post Reply
pezz
Newbie
Posts: 23
Joined: Mon Oct 05, 2009 7:37 pm
Bike: Z1000
State: New South Wales

chain and sprox

Post by pezz »

just wondering where the best place online is to get a chain and sprockets for my 03 z1000 is..

wouldnt mind a bling/fancy rear sprocket


cheers
addicted to corners
oldman

Re: chain and sprox

Post by oldman »

In the states bikebandit.com. I do not know about shipping to you however. The best chain is an EK, made in Japan. make sure you get a chain with at least 9,300 lbs. tinsil strength, all chains are not equal. Your chain is a 525 x112 links. DID chains stretch like rubber bands and are of general low quality. You will need a link press tool to remove your old chain and install the new one unless you want to remove the rear swingarm. The chain press actually makes the link as strong as the other links on the chain. Do not use a clip on master link, much to weak for your bike. Good luck. The recommended replacement is EK sport 525mvxz x ring chain.
I just found out you folks have Jim Beam in a can, wow, what an advanced country.
pezz
Newbie
Posts: 23
Joined: Mon Oct 05, 2009 7:37 pm
Bike: Z1000
State: New South Wales

Re: chain and sprox

Post by pezz »

cheers mate...
already have a link press...
will check out that site
thanks again
addicted to corners
User avatar
waynemorgan
KSRC Contributor
KSRC Contributor
Posts: 1989
Joined: Sun Aug 31, 2008 4:36 pm
Bike: ZZR600
State: New South Wales
Location: Penrith NSW Australia

Re: chain and sprox

Post by waynemorgan »

There are plenty of site sponsors here - http://www.ksrc-au.com/phpBB3/viewtopic.php?f=8&t=319

Try a couple of them - someone will have what you're after :D
I don't like the term insane - I prefer mentally hilarious!
Post Reply