ZRX's @ All Bike Drags Palmyra, Mackay Qld.

Z, ZRX, ER & other naked bikes. Get naked in here.!
Post Reply
User avatar
Errol
KSRC Member
KSRC Member
Posts: 148
Joined: Fri Apr 28, 2006 6:13 pm
Bike: ZRX
State: Queensland
Location: Mackay

ZRX's @ All Bike Drags Palmyra, Mackay Qld.

Post by Errol »

A few ZRXers havin fun Saturday 19-9-09. :kuda:
Attachments
My 1200 2001 model only running 10.9s on the day
My 1200 2001 model only running 10.9s on the day
IMG_7119[1].JPG (74.08 KiB) Viewed 1607 times
Again
Again
IMG_8057[1].JPG (64.55 KiB) Viewed 1613 times
Ronnie Stayt running a stock '06 model
Ronnie Stayt running a stock '06 model
IMG_6875[1].JPG (4.75 KiB) Viewed 1607 times
Ronnie Stayt runnin 11.2 on stock '06 model
Ronnie Stayt runnin 11.2 on stock '06 model
IMG_8242[1].JPG (67.11 KiB) Viewed 1612 times
T'ville based 1200 running 11.2 also (I think)
T'ville based 1200 running 11.2 also (I think)
IMG_8055[1].JPG (69.94 KiB) Viewed 1614 times
Back in Black 2001
Once you had BLACK you NEVER go back!
1/4 mile Best MPH 129.47
Best ET 10.747
User avatar
rooster
VIP MEMBER
VIP MEMBER
Posts: 2300
Joined: Mon Mar 21, 2005 7:39 am
Bike: Z1000
State: New South Wales
Location: FULLY FLEDGED SHIRE HOBBITT

Re: ZRX's @ All Bike Drags Palmyra, Mackay Qld.

Post by rooster »

Would that be a Kerker race meg on yours? The quiet pipe :D
If life is like a box of chocolates, why do I always get the laxettes?
bonester
KSRC Contributor
KSRC Contributor
Posts: 2075
Joined: Sun Apr 17, 2005 1:00 pm
Location: Toowoomba/Ipswich Queensland

Re: ZRX's @ All Bike Drags Palmyra, Mackay Qld.

Post by bonester »

What did they do, time wise? :D :kuda:
2 X ZRX1200R 4 X ER6N, GT550, 1988 ZX-10, 4 X GPZ250R, 4 X GPZ900R and GPZ750R :) Yeah I like Kawasakis.
User avatar
Errol
KSRC Member
KSRC Member
Posts: 148
Joined: Fri Apr 28, 2006 6:13 pm
Bike: ZRX
State: Queensland
Location: Mackay

Re: ZRX's @ All Bike Drags Palmyra, Mackay Qld.

Post by Errol »

rooster wrote:Would that be a Kerker race meg on yours? The quiet pipe :D
It was a std Kerker meg when i bought it. But it was unbelievably restrictive noise & powerwise, so I machined up a new end cap from billet aluminium & made my own baffle from 2 1/4" perf s/s tube.

I actually posted the mod on ZRXOA @ somepoint.

Been running like that for about 3 yrs & 30,000 klm's now no problems
Back in Black 2001
Once you had BLACK you NEVER go back!
1/4 mile Best MPH 129.47
Best ET 10.747
User avatar
Phil
Philthy
Philthy
Posts: 5811
Joined: Thu Jul 01, 2004 8:44 am
Location: somewhere in nasho

Re: ZRX's @ All Bike Drags Palmyra, Mackay Qld.

Post by Phil »

Errol wrote:
rooster wrote:Would that be a Kerker race meg on yours? The quiet pipe :D
It was a std Kerker meg when i bought it. But it was unbelievably restrictive noise & powerwise, so I machined up a new end cap from billet aluminium & made my own baffle from 2 1/4" perf s/s tube.

I actually posted the mod on ZRXOA @ somepoint.

Been running like that for about 3 yrs & 30,000 klm's now no problems
You'll need to speak up Errol, Ol Eric will be 98% deaf by now ;) :kuda:
Phil

2018 Z900RS
2017 Z125 Pro

HCC - Road Captain
User avatar
Errol
KSRC Member
KSRC Member
Posts: 148
Joined: Fri Apr 28, 2006 6:13 pm
Bike: ZRX
State: Queensland
Location: Mackay

Re: ZRX's @ All Bike Drags Palmyra, Mackay Qld.

Post by Errol »

bonester wrote:What did they do, time wise? :D :kuda:
Hey bonester,
Mine has been running 10.7 to 10.8 since I fitted the Kerker. But I was having very bad front end wobbles approaching the finish line @ this meet, so was only running 10.9 to 11.0's. Turned out the new front tyre had been fitted with the weights 180' out :shock: . Not nice to find this balls out @ 230 kph I can tell you.

Ronnie on the green 06' model was running 11.2 & may have pulled an 11.1, his bike is bone stock minus mirrors. In saying that Ron is very experienced (Has a aussie land speed record in his class on his ZX12R @ Lake Gardiner about 2 or 3 yrs back) & weighs about 75kg which is 40 kg less than me.

The red 1200 from Townsville was I think also pulling 11.2's & may have gone into the 11.1's. I spoke to the owner (can't remember a name?) & the bike is stock engine wise, running -1 on the front sprocket. I know he pulled a PB on the day.

Back when mine was stock it also pulled 11.2's with me then weighing in around 98kg + riding gear. I now have 80'000k's on the clock, head has never been off the motor. Still run's hard :kuda: .
Back in Black 2001
Once you had BLACK you NEVER go back!
1/4 mile Best MPH 129.47
Best ET 10.747
User avatar
Phil
Philthy
Philthy
Posts: 5811
Joined: Thu Jul 01, 2004 8:44 am
Location: somewhere in nasho

Re: ZRX's @ All Bike Drags Palmyra, Mackay Qld.

Post by Phil »

Errol wrote:
bonester wrote:What did they do, time wise? :D :kuda:
Hey bonester,
Mine has been running 10.7 to 10.8 since I fitted the Kerker. But I was having very bad front end wobbles approaching the finish line @ this meet, so was only running 10.9 to 11.0's. Turned out the new front tyre had been fitted with the weights 180' out :shock: . Not nice to find this balls out @ 230 kph I can tell you.

Ronnie on the green 06' model was running 11.2 & may have pulled an 11.1, his bike is bone stock minus mirrors. In saying that Ron is very experienced (Has a aussie land speed record in his class on his ZX12R @ Lake Gardiner about 2 or 3 yrs back) & weighs about 75kg which is 40 kg less than me.

The red 1200 from Townsville was I think also pulling 11.2's & may have gone into the 11.1's. I spoke to the owner (can't remember a name?) & the bike is stock engine wise, running -1 on the front sprocket. I know he pulled a PB on the day.

Back when mine was stock it also pulled 11.2's with me then weighing in around 98kg + riding gear. I now have 80'000k's on the clock, head has never been off the motor. Still run's hard :kuda: .
And using my 9 as an example- has a whole lot more left to go ;)
Phil

2018 Z900RS
2017 Z125 Pro

HCC - Road Captain
User avatar
Errol
KSRC Member
KSRC Member
Posts: 148
Joined: Fri Apr 28, 2006 6:13 pm
Bike: ZRX
State: Queensland
Location: Mackay

Re: ZRX's @ All Bike Drags Palmyra, Mackay Qld.

Post by Errol »

Phil wrote:[And using my 9 as an example- has a whole lot more left to go ;)
Hey Phil,
Are you talking times or life/milage in the motor?
I did notice a few pock marks on the clutch near the tensioner when I roughed em' up the night before raceday :roll: .
If I don't sort that engine & my life may be somewhat shortened :) .
Back in Black 2001
Once you had BLACK you NEVER go back!
1/4 mile Best MPH 129.47
Best ET 10.747
User avatar
smithy5
VIP MEMBER
VIP MEMBER
Posts: 3467
Joined: Wed Oct 15, 2008 11:37 am
Bike: Scooter
State: New South Wales
Location: Kurrajong, NSW

Re: ZRX's @ All Bike Drags Palmyra, Mackay Qld.

Post by smithy5 »

I know your only going in a straight line......... but whats with the farken jeans at 230 kph... :shock: :shock:
2013 Triumph Thunderbird 1700 Storm
Suzuki 1300 LillBusa Ute
Serviced by Allfixed Automotive Castle Hill PH: (02) 9634 1455
SRT Survivor & Oficial Photographer
User avatar
Phil
Philthy
Philthy
Posts: 5811
Joined: Thu Jul 01, 2004 8:44 am
Location: somewhere in nasho

Re: ZRX's @ All Bike Drags Palmyra, Mackay Qld.

Post by Phil »

Errol wrote:
Phil wrote:[And using my 9 as an example- has a whole lot more left to go ;)
Hey Phil,
Are you talking times or life/milage in the motor?
I did notice a few pock marks on the clutch near the tensioner when I roughed em' up the night before raceday :roll: .
If I don't sort that engine & my life may be somewhat shortened :) .
Mileage :D , I would no idea if the times are hot - or snot ;)

I just love seeing the ZRX being ridden as the manufacturer intended - well done :kuda: I think those marks are something they all get, mine has 53K on it now. The 9 has 130 and has gained HP 3 since 106 :shock:
Phil

2018 Z900RS
2017 Z125 Pro

HCC - Road Captain
User avatar
Errol
KSRC Member
KSRC Member
Posts: 148
Joined: Fri Apr 28, 2006 6:13 pm
Bike: ZRX
State: Queensland
Location: Mackay

Re: ZRX's @ All Bike Drags Palmyra, Mackay Qld.

Post by Errol »

smithy5 wrote:I know your only going in a straight line......... but whats with the farken jeans at 230 kph... :shock: :shock:
Well that was one of the reasons I decided not to run my third race. With the bike chuckin a mental @ that speed.............. it could be very messy.

On the other hand, I don't think a set of leather pants would make a lot of diffrence in a highside @ that speed, well not to the rider anyhow.

If you dial in under 10.5's it is compulsory to wear full leathers.............
Back in Black 2001
Once you had BLACK you NEVER go back!
1/4 mile Best MPH 129.47
Best ET 10.747
User avatar
robracer
VIP MEMBER
VIP MEMBER
Posts: 15251
Joined: Thu Feb 24, 2005 8:23 pm
Bike: ZX6R
State: New South Wales
Location: Port Macquarie

Re: ZRX's @ All Bike Drags Palmyra, Mackay Qld.

Post by robracer »

Errol wrote:
smithy5 wrote: I don't think a set of leather pants would make a lot of diffrence in a highside @ that speed, well not to the rider anyhow..
At least there is a chance the leathers will have armor...jeans just don't cut it :shock:
Post Reply