The Finished Product ( Before's & After's)

Bodywork Modification Discussion.
User avatar
Gazza
KSRC Contributor
KSRC Contributor
Posts: 1204
Joined: Mon Apr 14, 2008 8:07 pm
Bike: ZX10R
State: New South Wales
Location: The Shire

The Finished Product ( Before's & After's)

Post by Gazza »

The bike as it was.
P1000906.JPG
P1000906.JPG (196.37 KiB) Viewed 3367 times
P1000907.JPG
P1000907.JPG (167.41 KiB) Viewed 3368 times
P1000908.JPG
P1000908.JPG (182.69 KiB) Viewed 3367 times
And the finished product nearly wasn't.
I finished the tank clear coat and all , took the fuel pump out off the old tank and transfered it to the new one,
took the fuel cap off and did the same, before i did this i syphoned the fuel out into a bucket.
I then installed the new tank on the bike and filled it up, went inside to wash my hands, came back into the garage to find fuel all over the floor :oops: :shock: .
The fucking tank sprung a leak :twisted: , which was behind the fairing mount screw for the side fairing under the seat on the right side.
So back to work for more repairs :twisted:
And now
P1000911.JPG
P1000911.JPG (236.96 KiB) Viewed 3365 times
P1000912.JPG
P1000912.JPG (149.13 KiB) Viewed 3365 times
2005 zx10r
User avatar
boozatboo
KSRC Member
KSRC Member
Posts: 273
Joined: Sun May 17, 2009 5:32 pm
Bike: Z1000
State: New South Wales

Re: The Finished Product ( Before's & After's)

Post by boozatboo »

Oh beautiful Gazzz...
Good job...
you should think of starting up a business dude...
brilliant !!!

Can't wait to see you on her....

Andy :kuda:
HONDA VTR250 - Charlie !!!

ZIGGY Z1000
User avatar
P4nza
KSRC Contributor
KSRC Contributor
Posts: 1588
Joined: Sun May 04, 2008 6:28 pm
Bike: Don't have one
State: New South Wales
Location: Somewhere between EC and OPH >:D

Re: The Finished Product ( Before's & After's)

Post by P4nza »

my god.... good job gazza!! congrats btw on the 10! :kuda:
2009 Kwaka Ninja 250R (Charlotte) Roady SOLD :'(
2010 Kwaka Ninja 250R SE (Jenny) Tracky SOLD :'(
Now i got no kwakas to ride! :\

"...I thought my tongue was longer than that!"

Team Crashed 2010 angry9.gif
User avatar
Richo
Team Chainsaw
Team Chainsaw
Posts: 1919
Joined: Wed Apr 09, 2008 1:55 pm
Bike: ZRX
State: New South Wales
Location: Mount Colah

Re: The Finished Product ( Before's & After's)

Post by Richo »

Nahhhhhh ... bullshit ... you just went and bought a brand spankers bro!!!

Farkin top job :kuda:
2004 ZRX1200R
And on the seventh day Richo ended his work which he had made. Decided resting was for soft cox, straddled the REX and headed up the old road.
And it was good
User avatar
seiko1
Apprentice Post Whore :-)
Apprentice Post Whore :-)
Posts: 7643
Joined: Wed Jan 14, 2009 8:36 pm
Bike: ZX14R
State: Victoria
Location: Geelong

Re: The Finished Product ( Before's & After's)

Post by seiko1 »

As Mr Bean would say....."Magic" :kuda:
Policy - Find something simple.....and Complicate it!
User avatar
SoundGuy
KSRC Contributor
KSRC Contributor
Posts: 1719
Joined: Wed Aug 22, 2007 1:22 pm
Bike: ZX10R
State: New South Wales
Location: Sydney

Re: The Finished Product ( Before's & After's)

Post by SoundGuy »

Nice on mate, well done, good job :kuda:
User avatar
dutchy
KSRC Contributor
KSRC Contributor
Posts: 2824
Joined: Thu Jul 17, 2008 11:31 am
Bike: ZX7R
State: Victoria
Location: Vic

Re: The Finished Product ( Before's & After's)

Post by dutchy »

oooh my sweet dick....its MAGIIIIIIIC!! :kuda: :kuda: :kuda:
I plan on living forever..............so far so good!!
Self appointed official poon-tang image supplier to KSRC
2010 KSRC MotoGP tipping champion

1998 ZX7R
1982 GPZ 550
Disco
Team Monster
Posts: 3430
Joined: Fri May 02, 2008 5:52 pm
Bike: ZX6R
State: Please Select a State

Re: The Finished Product ( Before's & After's)

Post by Disco »

Look's hawt Gazza :kuda: .....Was the tank the only damage?
Stopping=Crashing!
User avatar
Blurr
Apprentice Post Whore :-)
Apprentice Post Whore :-)
Posts: 7246
Joined: Wed Apr 02, 2008 10:31 pm
Bike: ZX10R
State: New South Wales
Location: Stockton

Re: The Finished Product ( Before's & After's)

Post by Blurr »

nice work mate!! Not bad turn around considering the set back.

Now about that full system :twisted:
Chariot of Fury 50cc 2stroke Race bike
Team Gumby in red
SAM & SRT Survived
User avatar
Dizzi
KSRC Contributor
KSRC Contributor
Posts: 1162
Joined: Fri May 08, 2009 9:17 pm
Bike: ZX6R
State: New South Wales
Location: Da Pie In Da Sky but ver else!!!

Re: The Finished Product ( Before's & After's)

Post by Dizzi »

That is hot Gaz well done very nice indeedi. :kuda:
10 Green ZX6R

I'm selfish, impatient and a little insecure. I make mistakes, I am out of control and at times hard to handle. But if you can't handle me at my worst, then you sure as hell don't deserve me at my best.
User avatar
Nelso
VIP MEMBER
VIP MEMBER
Posts: 3691
Joined: Wed Feb 13, 2008 9:22 pm
Bike: ZRX
State: New South Wales
Location: Wollongong

Re: The Finished Product ( Before's & After's)

Post by Nelso »

:shock: Nice job Gazza! If it's as good close up as it looks in the pics you have done VERY well as you can't tell it's been repaired at all.
Green '08 ZRX1200 Road bike
Green 2012 ZX10 Track/race bike
Green '89 H1 ZXR750 race bike
'89 RMX250 motard race bike
2015 YZ450
2017 KTM EXC300
User avatar
tim
VIP MEMBER
VIP MEMBER
Posts: 5815
Joined: Wed Dec 10, 2008 10:12 pm
Bike: ZX6R
State: New South Wales
Location: Sydney, NSW

Re: The Finished Product ( Before's & After's)

Post by tim »

dutch80au wrote:oooh my sweet dick....its MAGIIIIIIIC!! :kuda: :kuda: :kuda:
ahahhaaha ahahahah ahahaha hahahhhhahahah eehehehhehe hehehehheh :lol:



Nice work Gazza!!!!!!
2008 ZX6R Special Edition
User avatar
ijuschill
KSRC Contributor
KSRC Contributor
Posts: 1210
Joined: Tue May 05, 2009 11:07 am
Bike: ZX6R
State: New South Wales
Location: Somewhere riding

Re: The Finished Product ( Before's & After's)

Post by ijuschill »

Nice work Gazza :kuda: looks awesome, hopefully you have no more fuel leaks hahaha :twisted:
08 Yellow ZX6R Aka Bumblebee

The 6 is an addiction, but Green is for life! :kuda:
User avatar
MrWasabi
Team Kuda
Team Kuda
Posts: 2039
Joined: Tue Feb 12, 2008 12:59 pm
Bike: ZX6R
State: New South Wales
Location: Omicron Persei 8

Re: The Finished Product ( Before's & After's)

Post by MrWasabi »

Nice one Gaz, you might have your first customer soon :twisted:
Mistakes:
Learn from the mistakes of others. You won't live long enough to make all of them yourself.
http://www.sentechcomputers.com.au
User avatar
ty
Team Ninja
Posts: 2869
Joined: Thu Apr 22, 2004 9:24 am
Bike: Honda
State: New South Wales
Location: Gosford
Contact:

Re: The Finished Product ( Before's & After's)

Post by ty »

VERY nice
If you have no fear, you're not going fast enough.
Never argue with an idiot. He'll drag you down to his level, then beat you with experience.
Post Reply