Cutting off the rear fender....

[_mattY]

hey,

i was wondering, how do you cut off the rear fender holding the license plate and create a new bracket to hold it??

this question kinda goes out to "woteva" wen he did his...can u tell me how u did it??

kinda noob question...lul....sorry

btw i found it in this post....
http://ksrc-au.com/phpBB3/viewtopic.php?f=30&t=18704

ohh and the bike is an '03 GPX250

cheers...

[matt76]

I just made a small bracket out of stainless, but its a lot easyier when you have all the gear to do it. Look on ebay and buy a 'fender eliminator'.

[cookeetree]

I'd be checking the legality of the mod first. I was of the understanding that the rear guard had to be no more than 45 degrees from the axle. That's why guys get done for fender eliminator kits, isn't it?

[robracer]

They are mostly aloy so you can bend them to any angle. I would suggest keeping your original so if there was any problem from the plod, you can re fit it. Bit hard tro do if you have chopped the fark out of it.

[_mattY]

thanks for the feedback fellas.

aside from ebay, would they sell them in any bike shops? i live in perth.

thanks.

[daffy67]

I'd be checking the legality of the mod first. I was of the understanding that the rear guard had to be no more than 45 degrees from the axle. That's why guys get done for fender eliminator kits, isn't it?

Correct and the plod here in qld excel at giving out tickets for it.

[woteva]

I have sold the bike now, so I hope the new owner isn't hassled for it with some weight on the seat, it may be OK.

There was some discussion about some others who were fined here, but got off because the ADR may not apply to your bike.
http://ridingsa.com/index.php?option=co ... mitstart=0

[daffy67]

That's interesting because a while ago i saw a diagram for Qld and they altered the 45 degree thing so that the rear mudguard had to cover at least half the rear wheel.
I also recall reading in a link that states can legislate their own vehicle standards and overide ADR, not sure how true that this but i do recall reading it.

[_mattY]

thanks.

i think they are illegal, but i havent heard of many people hassled for them.

i think i'll just risk it and try my local kawa store....

thanks again!

[IsleofNinja]

Matty (good name that one)

RatedR parts (ebay seller) is based in Yokine. sells fender eliminators etc..

Careful with the LED indicators (If you were thinking about it) though as many are piss poor in the light output department and cost you extra to get the flash rate right FYI.

The one on the 10 is actually made from a piece of 20mm alloy angle and the RatedR led number plate light/bolts. Looks soooo neat/trick.