Number Plate Frames are nearly all gone!!!

mike-s · Post by **mike-s** » Thu Jun 15, 2006 2:43 pm

laney, i'd suggest filing about 1mm off the top of your plate where the top clip goes. that may bring it down enough.

Lainie · Post by **Lainie** » Thu Jun 15, 2006 2:56 pm

fixed now nothing a bench grinder couldn't fix

Thanks Mike I had to take off top and bottom but its done and on

FrogZ · Post by **FrogZ** » Thu Jun 15, 2006 3:25 pm

ZZRCHIKKY wrote:i want a personalised plate , u cant get them in qld for bikes yet

OH REALLY
Chikky I think you need to check out http://www.ppq.com.au/frameset.asp

PS last time I checked FATCOP and COPSUX was still available and is sure to get you the attention of uniformed guys !!

But for bikes you must use 3 letters and 2 numbers or 2 numbers adn then 3 letters....

ZZRCHIKKY · Post by **ZZRCHIKKY** » Thu Jun 15, 2006 3:33 pm

OHHH YAY

:D:D:D i onyl checked a few weeks ago lol

don55 · Post by **don55** » Fri Jun 16, 2006 2:16 am

Thanks Glen they arrived Thursday.

plane · Post by **plane** » Fri Jun 16, 2006 12:46 pm

My frame arrived in the post today!

Thanks for getting this organised Glen!

Cheers,
Pete

FrogZ · Post by **FrogZ** » Fri Jun 16, 2006 1:30 pm

So that must mine are waiting in the letterbox

Time to flex off I think.....

Glen · Post by **Glen** » Fri Jun 16, 2006 3:46 pm

frogzx12r wrote:So that must mine are waiting in the letterbox
Time to flex off I think.....

Probably not mate, yours only went yesterday as I didn't have your address. Then again you never know.

Pabs · Post by **Pabs** » Fri Jun 16, 2006 6:06 pm

thanks Glen got mine 2day,
just waiting for the kwaka now

Smitty · Post by **Smitty** » Fri Jun 16, 2006 9:23 pm

Glen

thanks
mine arrived this arvo

Post by **robracer** » Fri Jun 16, 2006 9:36 pm

Thanks Glen got mine today... yay...but

Being a printer all I can say is thet the quality of the print is shite
You are not to blame for this but if I was ordering these I would
definently have a word about the quality of the print to the
manufacturer & work out if the quality is acceptable
The print is not straight ... like 3mm diferance on one side & the print
has a ghost image & ink bleed on one half
I used to print these in bulk & know that its not rocket science to print
properly ... As for mine I am going to customise it

Might just be that I got a dud ...anyway not a prob mate just wanted you
to know
Cheers Rob

Glen · Post by **Glen** » Mon Jun 19, 2006 8:10 am

robracer wrote:Thanks Glen got mine today... yay...but
Being a printer all I can say is thet the quality of the print is shite
You are not to blame for this but if I was ordering these I would
definently have a word about the quality of the print to the
manufacturer & work out if the quality is acceptable
The print is not straight ... like 3mm diferance on one side & the print
has a ghost image & ink bleed on one half
I used to print these in bulk & know that its not rocket science to print
properly ... As for mine I am going to customise it
Might just be that I got a dud ...anyway not a prob mate just wanted you
to know
Cheers Rob

Yeah the quality is a bit variable Rob. The guys just kicking off and probably doesn't have his shit quite together as yet.

ZZRCHIKKY · Post by **ZZRCHIKKY** » Mon Jun 19, 2006 1:30 pm

god mine today

:D:D , love the stamps there so cute

thanx glen

oh and how do i put it on ???? do i have to take the number plate off ???

MickLC · Post by **MickLC** » Mon Jun 19, 2006 2:01 pm

After pissing around all week I finally put mine on the bike yesterday and I reckon it looks pretty good. I reckon it's got to be worth at least 0.9 horsepower

Stace · Post by **Stace** » Mon Jun 19, 2006 2:07 pm

Just got mine out of the mail when i went home for lunch. Looks the goods. I'll get it on the 9 tomorrow night. Once again, well done mate.