Thoughts on my ZX-14 Now with pictures on page 3

General Discussion
ShadowKeeper
Newbie
Posts: 22
Joined: Tue Apr 18, 2006 11:14 pm
Location: Perth, western Australia

Thoughts on my ZX-14 Now with pictures on page 3

Post by ShadowKeeper »

As you may or may not know I picked mine up on Tuesday the 23rd and have done just over 750km on it to date, been having way too much fun to tell anyone about it (or answer PMs, take photos etc etc). Took it up to the practice sessions for the Superbikes on Friday with Arwon and attracted a hell of alot of attention (it was the bike drawing attention, not Arwon), I've only had one comment so far about it being ugly. But, hey, each to their own. I thought his girlfriend smelt funny..........Just kidding.....

I'm 6'4" tall and this is the most naturally comfortable bike I have ridden. I've only done a few runs over the recommended run in revs of 4000km but it gets to 260km/h very quickly (controlled conditions ). Very ridable around town because the ECU controls the power under 5000rpm. However..... It would be nice to be able to turn this feature off because after 5500rpm it wants to rip your arms from their sockets and lift the front wheel. It would be so nice for the power to be more linear through the whole rev range so that it wasn't such a shock when the power actually does come on.

Me being the hefty lad that I am (more than one reason as to why people refer to me as big Rob) I still managed to get the front wheel skipping off the ground under power in third gear. God knows how I'm going to control this thing down at the drags , Although there is no harm in trying

The brakes are nicely bedded in now and are lethal. Pillion comfort is pretty good according to my wife, not tourer quality but certainly not two rabbit fucking style either. The seating position is a little more sport orientated compared to my ZZR 1100 but over the ZX-14 has a taller seat, less reach to the bars, it's narrower, the mirrors are better and it has a shorter wheel base, combine that with better suspension and better stering rake it handles reaaly well. I could quite comfortably ride this bike for long periods of time and not feel crippled when I got off to re-fuel. I haven't been able to do that since a very nasty accident I had in the early 90's after crashing my GPZ 1000RX.

The 215kg (dry) weight is kept very low making this bike feel extremely light, well to me anyway, I can't say for the rest of the puny types on this forum (j/k), and I have no troubles flicking it around some of the local twisty bits. One thing I don't have complete faith in is the BT 014s that are OEM supplied, I've never been a Bridgestone person and I am looking forward to wearing the things out so I can put on some tyres that I am comfortable with.

The fittings and fasteners are all good quality and well made (aren't they all when they are all new and shiny). It will be interesting to see how they wear, although this is a fair weather bike for me so the only water it will see will be from a hose while I wash it. Speaking fo which, I've washed her twice now (couldn't hit the town on a Friday night with a bug encrusted bike now could I). I was the one to detail the bike after it came out of the crate, washed the dust and factory grime off of it and gave it a good paint clean and polish/wax using the Gold Class range of products from Meguires. two coats of wax and she GLEAMS! Not a single swirl mark to be seen.

Instrumentation is easily read and incorporates a Clutch engage light and shift light for those leave the lights in a hurry time. These lights can be set to dim or bright as well as being able to be set to pulse or stay on at the given rev range, cool feature but not really usable yet because of the run in period that I'm trying so damn hard not to break while accelerating.

In top gear at 4000rpm the bike sits at 130km/h, at 80km/h in the same gear it cruises along at just under 2000rpm and will still accelerate. *Warning* it is really REALLY easy to speed on this bike, the bike travels so smoothly with very little vibration and wind noise that you feel as if you are going much slower than you actually are 130km/h feels like 100km/h. I'm sure if you were to sit bolt upright travelling at 200km/h you could light a cigarette, or pass your pillion some biscuits and dip.

The lighting is, in a word, phenominal. There is no mistaking that there is a bike comming up behind you in traffic, as an experiment I sat in the right lane going down the freeway traveling just over the limit with my high beam on, slower cars actually moved over to the left (OMG OMG!). Was it to get away from the high beam or did they think a UFO was behind them? I don't know but it worked.

Ok stuff the good points here are the bad.........

1) The 1000km run in period is KILLING me. I want to go play some more

2) When you leave your glorious black bike out of sight for more than 5 minutes you come back to find at least 4 different sets of fingerprints on it.

3) This is not a cool running bike. It heats up quick in stop-start traffic. Maybe it's because the engine is still being run in so things are still a bit tight causing more friction and thus more heat, or the tolerances are so close that it's on the edge all the time. Nice at night though.

4) The more I think about it, the ECU controlling the power and torque below 5000rpm, it's not a good thing. If I let someone ride this without telling them about it, after a few mellow corners "Thinking" they are used to the power and then they suddenly let rip and go WOT in first or second they will loop the bike bigtime, and then there would be a falling out of friends a punch up, no more beers drunk late at night....and it would be all bad. I have let one very close mate ride it, I trust him with my wife so why not trust him with my baby(the guy who drove down to help me pick it up, Arwon) and he was gentle with it because it only had 150ish km on the clock. He came back smiling. At that point I was pretty sure I didn't buy a lemon.

5) Getting to the suspension adjusters on the rear shock is a pain in the butt, not to mention the knees as well. The screw driver in the tool kit for on the fly suspension changes is no where near long enough to comfortably get to the compression dampening, rebound is a little better and the preload........ I know I will have to adjust it but I am not looking forward to it.

6) Fuel consumption. 22lt tank 250kms approx is the best so far, although admittedly thats with alot of gear changes so as not to keep the engine at the same revs for too long. I suspect that this will get better after the 1000km oil change. But really a bike capable of doing 299km/h right out of the box who gives a flying fig about fuel economy.

7) The swing arm is ugly, I think they should have used a modified version of the one from a ZX-10. ( I have issues with swing arms, ask my mates, actually I just have issues, ask them, they will tell you....)

I'll be cross posting this to other forums, because I'm an unoriginal bastard who knows how to use cut and paste technology.

All in all I can without a Shadow of a doubt state that I am relieved that I waited for the release of this bike. Top speed and acceleration aren't why I bought this bike, basically I did it to upgrade what I thought was an already terrific platform that suited my style of riding that I do the majority of the time. I wanted the latest technology without compromising the comfort levels I have found with my other Kawasakis of the same type, starting with my first Kawasaki the GPZ 1000RX, then to my two ZZR1100's and now this. I was never tempted to buy a ZZR1200 because other than a cosmetic change and an upgrade in engine size it was the same as my ZZR 1100 except it was less comfortable to me..

This has it all for me two trip meters, fuel gauge, temp gauge,average fuel consumption reading, instant fuel consumption reading, distance until empty, Radial brakes, more adjustable and much better quality suspension, wave rotors, Radial mounted hydraulic clutch, awsome lighting, Fuel injection (no more choke!). It looks modern and is not something that hasn't changed it's look for the past 15 or so years.

I don't go in for the Hayabusa/ZX-14 flame wars, I got on a Hayabusa once and it just didn't appeal to me, I am sure they are a great bike and they look purpose built (which they have more than proved in my eyes) but they are not for me. I don't fit on them very well, and don't find them very comfy. I like to travel by bike and I like to be relativlely comfortable when I do it.



Ok enough harping on from me, I need sleep so I can go for a ride tomorrow.


Shadow Keeper 8)
2006 ZX-14
2000 ZZR1100
Last edited by ShadowKeeper on Wed May 31, 2006 10:46 pm, edited 1 time in total.
chameleon
KSRC Regular
KSRC Regular
Posts: 763
Joined: Sat Nov 26, 2005 8:38 am
Location: Briso

Post by chameleon »

Great review there mate. You should be writing for a bike mag. :P
WA, Ahhhhh! Memories memories. Not many cops on the road through the sterling ranges from memory :wink:
Image
User avatar
ZZRCHIKKY
KSRC Contributor
KSRC Contributor
Posts: 1085
Joined: Sat Nov 05, 2005 7:07 pm
Bike: Ducati
State: Queensland
Location: G Town , Tasmania
Contact:

Post by ZZRCHIKKY »

well there will be now uv said that :P
owwww me lubs my dr 650 WOOOOOOOOOOOOOT
User avatar
Plaz
Team Ninja
Posts: 1983
Joined: Wed Nov 10, 2004 7:04 pm
Bike: Z1000
State: South Australia
Location: Adelaide SA

Post by Plaz »

Great review Shadow (Ya lucky bastage).

I only got to sit on one yesterday and compare it to the 12, hate to say it butthe 12 looks positively ancient next to the 14 and feels a lot bigger and heavier.

Now stop sleeping and go knock off those last 250km so you can start telling us all about the 5th gear power wheelies you are pulling :lol:
chameleon
KSRC Regular
KSRC Regular
Posts: 763
Joined: Sat Nov 26, 2005 8:38 am
Location: Briso

Post by chameleon »

PS:

When ya have a few thou on her give us another review please.
Image
User avatar
MickLC
Team Crim
Posts: 5429
Joined: Wed Apr 21, 2004 1:04 pm
Bike: Z1000
State: ACT

Post by MickLC »

I was wondering why they had such a kick at 5,000rpm. I've only had a quick ride but have to agree with most of what you said. At 100km/h the engine is idling along at just over 3,000rpm, and at much higher speeds the fairing offers a lot of protection, so long trips would be economical and comfortable.
Enjoy your new bike mate 8)


...ps have you figured out what those bolts at the back of the pillion peg bracket are for yet?
'13 Z1000, '76 Z650+,'91 KLR250, '95 ZX6R Racebike
User avatar
aardvark
Apprentice Post Whore :-)
Apprentice Post Whore :-)
Posts: 5766
Joined: Wed Apr 07, 2004 6:45 pm
Bike: Yamaha
State: South Australia
Location: Adelaide, S.A.
Contact:

Post by aardvark »

Mick C wrote:...ps have you figured out what those bolts at the back of the pillion peg bracket are for yet?
Hahahahahahahahahahah.... Plas and I were discussing that very thing yesterday. WTF??

Top review Shadow. Enjoy ya riding.
Barrabob
KSRC Contributor
KSRC Contributor
Posts: 1882
Joined: Sat Sep 18, 2004 11:00 am
Location: Brisbane

Post by Barrabob »

Probably will take 2500kms to loosen up properly, a good ride in the hills is the way to go for run in plenty of up and down the gears and engine brakeing going on and no need to rev the daylights out of it theres al;ways trackdays for that. :lol:

I will have to drop by the dealer on monday morning for a look at one, have any of the us sites mentioned a TRE or smaler for them to make power lower in the rev range.

I believe its a good idea to have the bikes initially set up like that till the owner is used to it so they dont loop the thing at the trafic lights by accident.
If I rode my bike at the speed of light, what would happen when I switched on its headlights?

Image
hoffy
Team Barge
Team Barge
Posts: 8744
Joined: Sun Oct 30, 2005 10:59 am
Bike: Z1000
State: New South Wales

Post by hoffy »

Sounds like it would make short work of interstate trips, are you planning any?

What do the stock cans sound like, any intention in changing them, or happy with them stock?

PicsPicsPics!!!
User avatar
the kid
KSRC Addict
KSRC Addict
Posts: 3948
Joined: Thu May 12, 2005 5:10 pm
Bike: Yamaha
State: Victoria
Location: Bendigo

Post by the kid »

Great review Rob or should I be more formal , Big Rob :lol:
Enjoyed reading that and look forward to a follow up report after the run in .
Keep enjoying :wink:
Ummmm let me see
User avatar
midorioni
KSRC Member
KSRC Member
Posts: 122
Joined: Tue Jan 24, 2006 6:19 pm
Bike: ZX9R
State: Overseas
Location: SINGAPORE

Post by midorioni »

Cool review shadow, you're one lucky dude 8)

Anyway i read somewhere the ZX14 uses hydraulic controlled cam-chain tensioners, wonder with all that power what's the lifespan on those things gonna be? New tech stuff from kwaka again and i bet there'll be aftermarket derestriction kit soon.

Haven't seen one ZX14 here yet thou :?
KAWAROCKS!!!!.....VOODOO-CHILD!!!!
User avatar
nobby
KSRC Member
KSRC Member
Posts: 239
Joined: Sun Mar 13, 2005 12:40 pm
Bike: ZZR1100
State: Queensland
Location: Clifton Beach, Cairns, FNQ

Post by nobby »

Great read mate, I personally love the look of the 14, I will never own one and probably get no closer than sitting on one in showroom, but I reckon they look the ducks guts.........
Image
User avatar
MickLC
Team Crim
Posts: 5429
Joined: Wed Apr 21, 2004 1:04 pm
Bike: Z1000
State: ACT

Post by MickLC »

aardvark wrote:
Mick C wrote:...ps have you figured out what those bolts at the back of the pillion peg bracket are for yet?
Hahahahahahahahahahah.... Plas and I were discussing that very thing yesterday. WTF??
The only thing we came up with was maybe they'll have some factory aero-fitted-to-the-body-shaped panniers that bolt on there. :?
'13 Z1000, '76 Z650+,'91 KLR250, '95 ZX6R Racebike
User avatar
Colette
Team Cougar
Posts: 3089
Joined: Thu Apr 22, 2004 10:20 am
Bike: ZX6R
State: New South Wales

Post by Colette »

Excellent review, sounds like you and the bike are a perfect fit :)

Do you have any pics?
User avatar
aardvark
Apprentice Post Whore :-)
Apprentice Post Whore :-)
Posts: 5766
Joined: Wed Apr 07, 2004 6:45 pm
Bike: Yamaha
State: South Australia
Location: Adelaide, S.A.
Contact:

Post by aardvark »

Mick C wrote:
aardvark wrote:
Mick C wrote:...ps have you figured out what those bolts at the back of the pillion peg bracket are for yet?
Hahahahahahahahahahah.... Plas and I were discussing that very thing yesterday. WTF??
The only thing we came up with was maybe they'll have some factory aero-fitted-to-the-body-shaped panniers that bolt on there. :?
Or the brackets for a rack?
Post Reply