Shirt Numbers - Please give your shirt selection and size

[icebreaker]

Front sounds good.

Rear, well it would have to fit onto the m and s... There is a huge difference in size between a S and a L...

[MadKaw]

Heres the pick of the 300mm wide sponsor text on the back of a small.

[MadKaw]

Spoke to the t-shirt peeps today and had to confirm the quantity of shirts to order to ensure they had them in time. So Its now finalised as per the first post with a few spares...
All that is required now is the final eps file with the slogan (they have modded the one we sent to remove the sponsors for the front print) and to confirm the width of the prints.. I have suggested 300 max width for the rear (looks big on a small but not so an anything larger) and 120mm for the front.
Heres a pic of an original Kawi T-shirt (size small) and the front logo is 110mm wide. This is to show a size estimate, we will be having a KSRC logo on ours....
Any thoughts or advice is appreciated..

[Smitty]

Dave
re your piccies
imho
the back is fine....looks good..nice and big and clear!
the funny Kawi sign in the front does not....blah
can we have a small KSRC logo
as previously mentioned....

also
glad to see your young fella thinks its funny too..


cheers

[MadKaw]

Don't worry the logo on the front is going to be the KSRC logo, I just sent that pick in to show how big a 110mm one is.. It was for size purpose only..

I'll edit thepost to save any confusion..

[MadKaw]

Hows this instead, just picture the logo bigger and in opposite background colours, like the back..

[Nanna10r]

Dave Looks Good To me.
Cheers Brett

[aardvark]

Looks good to me.

[mrmina]

i like the KSRC sticker over the kwaka logo.

[ty]

cool - good stuff
ty

[Smitty]

Dave
cool......
Ima happy lil' vegemite......

[Neka79]

hmm i reckon the logo on the front would look better than that saw blade thing..just my 5c
neka

[SeanZX9R]

The blade logo Dave was showing, is NOT the logo we are using. It is just an EXAMPLE of the sizing that our KSRC logo will be on the front.

[MadKaw]

Ok guys, Its a happenen thing.!!
The T-shirts are go.!!!

The final sizes of the logos are as follows,
Front logo from K to helmet is 115mm
Rear print is 290mm from the first P to the last I in the sponsors name, making the logo about 260 - 270 mm.
The rear print with the slogan is the same size but the slogan is 320mm wide. I figure this could be bigger as it is across the shoulders..

It may be a little large for a small and little small on a XXL, but its a compromise... The print peeps set it out and thinks it looked fine...

The quantities have also been finalised as per the first post and no more can be added. I have orderd a few spares in all sizes and styles so if anyone wants one who hasn't orderd one yet, be quick..
The next run will be when we get enough interest to order another 50..

If all goes well, they WILL be ready for the GP, so bring ya money with ya..

I think the best way to handle this is,
1. Those going to the GP can pick up and pay there.
2. Those not going to the GP can give the money to someone from there state who is going to the GP and they will bring the T's back.
3. Those in NSW can get theres direct from me.
4. Those others will have to send the $ or bank transfer to me, with extra to cover postage and I will mail them to ya...

Unless theres any other ideas of course..

Oh, and the final price is $22 each inc GST.!!
Its bargain at twice the price..

[icebreaker]

hmm i reckon the logo on the front would look better than that saw blade thing..just my 5c
neka

OMG, some people really don't read very well do they?????



Top stuff Dave, Selena got those files from me this morning, so obvious they were ok. The size across the top IMO sounds abit large.. no slogan for singlets by the sounds of it.. lol

Can't wait for them to roll off the press!

Dan