Attempt at a major service

Duane · Post by **Duane** » Mon Feb 20, 2006 9:03 am

Hey peoples, I need to know if anyone in vic has a vaccuum gauge and the measuring tool that you use to measure the gap between the doovalacky and the thingimajiggy valve doovas. (don't worry, theres no sugar, and i have the manual)

Cheers

Duane

mike-s · Post by **mike-s** » Mon Feb 20, 2006 10:14 am

Borrowed a carbsynch off my neighbour and synched my carbs yesterday, took 20 minutes, tops.

You also reminded me i need to do my tappets too, something about "never having actually done them since the bike was serviced at purchase time" 16 thou km ago

. Now that the tanks off, i might get to it after work this week

Good luck getting the carb synch tool and the "feeler guages", i believe thats the magic words youwere looking for....

mrmina · Post by **mrmina** » Mon Feb 20, 2006 12:19 pm

mate i was looking at getting one and they were $100-200 bux.

but no, i dont have one

Duane · Post by **Duane** » Mon Feb 20, 2006 12:24 pm

mrmina wrote:mate i was looking at getting one and they were $100-200 bux.

but no, i dont have one

Thats right, Mina judges things off how hard the suck by referring them as a 3 minute blowie or a 5 minute blowie...

Post by **icebreaker** » Mon Feb 20, 2006 12:55 pm

I really need to get my valves checked and my carb's balanced...

Duane · Post by **Duane** » Mon Feb 20, 2006 1:21 pm

dan,

if i can get my hands on these tools - we can do it together

mfzx6r · Post by **mfzx6r** » Mon Feb 20, 2006 1:29 pm

Duane wrote:dan,

if i can get my hands on your tool - we can do it together

Tape it for me and I'll send it to funniest home videos

Duane · Post by **Duane** » Mon Feb 20, 2006 1:32 pm

mfzx6r wrote:
Duane wrote:dan,

if i can get my hands on your tool - we can do it together
Tape it for me and I'll send it to funniest home videos

Mate, the only time you'll get a tape from me is when im blackmailing you after you slept with that penguin at the GP last year

Rossi · Post by **Rossi** » Mon Feb 20, 2006 6:44 pm

Duane
check out this for some carby balancing
http://www.bikersoracle.com/zx9/forum/s ... php?t=2375
http://www.zr-7.com/carbs.htm

Valves
http://www.ovrlnd.com/9RValveCheck/ZX9ValveCheck.html
http://www.zr-7.com/valves.htm

Maty10 · Post by **Maty10** » Mon Feb 20, 2006 7:14 pm

I've got a mecury carb balancer, with fittings, and feeler gauges. I'll probably be in Nazza Wazza on the weekend if you don't find one before then Duane.

Tones · Post by **Tones** » Mon Feb 20, 2006 7:30 pm

Maty10 wrote:I've got a mecury carb balancer, with fittings, and feeler gauges. I'll probably be in Nazza Wazza on the weekend if you don't find one before then Duane.

Same here, although I'm in Hampton Park. Sing out if you need a hand.

Cheers

Gosling1 · Post by **Gosling1** » Mon Feb 20, 2006 9:08 pm

Duane wrote:
mfzx6r wrote:
Duane wrote:dan,

if i can get my hands on your tool - we can do it together
Tape it for me and I'll send it to funniest home videos
Mate, the only time you'll get a tape from me is when im blackmailing you after you slept with that penguin at the GP last year

Did he think it was one of those *Midget Nuns* ??

SocialSecurity · Post by **SocialSecurity** » Mon Feb 20, 2006 9:15 pm

Maty10 wrote:I've got a mecury carb balancer, with fittings, and feeler gauges. I'll probably be in Nazza Wazza on the weekend if you don't find one before then Duane.

im in desperate need of a balance... im pretty close by too, avondale heights.... any chance?

Duane · Post by **Duane** » Mon Feb 20, 2006 9:59 pm

tones, might take u up on the offer, maty 10 thanks but i wont need it so soon (got a little while to go)

mfzx6r · Post by **mfzx6r** » Tue Feb 21, 2006 10:14 am

Gosling1 wrote:
Duane wrote:
mfzx6r wrote: Tape it for me and I'll send it to funniest home videos
Mate, the only time you'll get a tape from me is when im blackmailing you after you slept with that penguin at the GP last year
Did he think it was one of those *Midget Nuns* ??

Alot of beer was drunk and I cant remember