Kawasaki Sportsbike Riders Club - Australia - Online Forum

Sorted.

Gotta bump this up in case somebody has the panel I need & hasn't seen this.

Sorted.

As above, must be straight & run true.
Don't need discs or tyre.
Prefer in Melb. area but happy to pay postage if necessary.

Paul is spot on, I had the same issue with my ZXR when converting it to a 'Race Loom'

The CDI unit needs to see a signal of around 0.7V (don't quote me on the exact figure) when the ignition key is turned so it knows the ignition circuit has been switched on with the key & not hotwired. If that ...

As per the title, I need a LHS side fairing panel for a '94 - '97 ZX9, original or f'glass OK. Even a Raceglass type 1 piece top fairing will work.

Colour not important, a bit of rash is OK but I'd prefer it to be structurally sound.

I'm in Melb. but happy to pay for postage.

I had a very similar crack in my ZXR frame & had it welded with no issues.
You need a welder who understands the nature of motorcycle frame welding though, it's very thin & if not done right will just crack right next to the new weld.

The 9 forks are around 50mm longer than the 750L & the inner & outer tubes are heavier wall thickness. The B1 9s had the same caliper mounts as the 750Ls but B2 & 3s had the 90mm caliper spacing for the 6 pot Toki's, The 9 fork springs are stiffer too.
The triples are interchangeable but not sure if ...

BUMP - looking for a full set of Race fairings for a ZX9 B (94-97) or a pair of original side fairings

& also a front/top race fairing for ZX9 C models (97-99) - don't need tail, front guard or screen for this one.

Mark - I just need the bracket itself.

Laidback - I'm familiar with the 1 piece race top/sides setup, I don't need to mount a headlight, etc.
Can't find anything in the for sale section.

Hey Chaps, I just bought a cheap 9 with some damage so I'm after a top (headlight) fairing, H bracket & a R/H footpeg mounting bracket.
I don't mind some damage to the fairing as long as there are no bits missing, colour not important, a f'glass race style top fairing will do the job also.
I'm in ...

No, a ZX7 engine does not fit into a ZXR L frame - I've tried it.

Yep, it's almost guaranteed that it'll be that 1 of the ram air equalisaton tubes has become dislodged.

Only ZX9 B wheels & ZX7 front wheels are a straight swap for an L.

Pics ?