GARY ............. Ream my Pipe !!!!!!!

For general Technical and Performance Discussions

GARY ............. Ream my Pipe !!!!!!!

Postby Nanna10r » Mon Aug 15, 2005 10:57 pm

Got the Fzzr Zorst off atm, it all its neglected Glory. Been trying to buy a flexi Drive for my Die Grinder to fit a flap sanding wheel to & poke it down to remove all the internal surface rust/scale.
Any better ideas how to do this guys.

Non PC Jokes willnot be condoned or frowned apon :roll:

Cheers Brett :wink:
"Nan & Pop Racing"
Poppy Hops on .... CBR150 (Superlite) CBR954 "Blade"
Nanna Naps on .... MoriWAKI NSR85 (Motolite) ZX10R "Crim"
We may ride like Old Can'ts, But Phuk we look DOOG !!!!!!
User avatar
Nanna10r
Team Ninja
 
Posts: 4291
Joined: Wed Jul 14, 2004 10:42 pm
Location: Brisbane Australia
Bike: ZX10R
State: Queensland

Postby HemiDuty » Mon Aug 15, 2005 11:01 pm

How bout a honing tool, the ones that go on the end of a drill?
Drmsby Middleton
DC Racing

Extreme Motorsports
M2R
Castrol
ColourSmart Chroming
Hi Side Leathers
Teknic
Sidi
DID Racing Chain
Goodridge
User avatar
HemiDuty
KSRC Contributor
KSRC Contributor
 
Posts: 1963
Joined: Mon Mar 28, 2005 6:27 pm
Location: Brisbania
Bike: Don't have one
State: Queensland

Postby mike-s » Mon Aug 15, 2005 11:22 pm

what about a plastic dish scrubber thingo that's been retired from duty

just cut any pointy bendy bits off the plastic scrapey bit at the and you have plenty of plastic bristles left over to scrape a lot of the rust off.

Bonus is it'll get rid of a lot of the crap and scales before killing any burring wheels with the oxide :-)
Image
If it hurts, you aren't doing it right.
User avatar
mike-s
Apprentice Post Whore :-)
Apprentice Post Whore :-)
 
Posts: 6142
Joined: Sat Aug 07, 2004 5:43 am
Location: Arncliffe, Sydney
Bike: Suzuki
State: New South Wales

Postby Jonno » Mon Aug 15, 2005 11:40 pm

Supercheap had a special on el-cheapo dremmel rotary tool which has a flex extension as part of the kit. $32 at the time. If you cant get one I will bring mine down thursday.
User avatar
Jonno
Mobile Chicane
 
Posts: 5613
Joined: Thu Dec 30, 2004 4:10 pm
Location: Brisbane
Bike: Other Kawi
State: Queensland

Postby MickLC » Tue Aug 16, 2005 4:09 pm

heheh you could always stick your....

Non PC Jokes willnot be condoned or frowned apon



...bugger, nothing to see here, move along...
'13 Z1000, '76 Z650+,'91 KLR250, '95 ZX6R Racebike
User avatar
MickLC
Team Crim
 
Posts: 5429
Joined: Wed Apr 21, 2004 1:04 pm
Bike: Z1000
State: ACT

Re: GARY ............. Ream my Pipe !!!!!!!

Postby Smitty » Tue Aug 16, 2005 4:51 pm

Pontikat wrote:Got the Fzzr Zorst off atm, it all its neglected Glory. Been trying to buy a flexi Drive for my Die Grinder to fit a flap sanding wheel to & poke it down to remove all the internal surface rust/scale.
Any better ideas how to do this guys.

Non PC Jokes willnot be condoned or frowned apon :roll:

Cheers Brett :wink:


easy peasy..this one
go to a tool store* and buy a LONG wire bottle brush
called a stove pipe cleaner
they come with a long twisted wire handle..about a metre long
and the diameter of the brush..your choice from 1" up to
about 6"
jam it up the zorst and twist :P
and you are done!

*(not Bunnings or Supercheap but Alltools or similar)

hth

cheers
GOTTA LUV the 12R!!
User avatar
Smitty
VIP MEMBER
VIP MEMBER
 
Posts: 10910
Joined: Wed Apr 21, 2004 1:59 pm
Location: 3rd rock from the Sun
Bike: ZX12R
State: Victoria

Re: GARY ............. Ream my Pipe !!!!!!!

Postby red_dave » Tue Aug 16, 2005 4:52 pm

Pontikat wrote:Non PC Jokes willnot be condoned or frowned apon :roll:


are you then encouraging a public bagging of the Ronster?
Image
User avatar
red_dave
Team Kuda
Team Kuda
 
Posts: 7973
Joined: Thu Oct 07, 2004 12:47 pm
Location: Dodgy BrisVegas
Bike: ZX6R
State: Queensland

Re: GARY ............. Ream my Pipe !!!!!!!

Postby Nanna10r » Tue Aug 16, 2005 10:32 pm

red_dave wrote:
Pontikat wrote:Non PC Jokes willnot be condoned or frowned apon :roll:


are you then encouraging a public bagging of the Ronster?


GO HARD DAVE5, i did leave it open ended for you's all.

Cheers Brett

PS Thanks Master Yoda, it seems I've been looking in the wrong shops.
"Nan & Pop Racing"
Poppy Hops on .... CBR150 (Superlite) CBR954 "Blade"
Nanna Naps on .... MoriWAKI NSR85 (Motolite) ZX10R "Crim"
We may ride like Old Can'ts, But Phuk we look DOOG !!!!!!
User avatar
Nanna10r
Team Ninja
 
Posts: 4291
Joined: Wed Jul 14, 2004 10:42 pm
Location: Brisbane Australia
Bike: ZX10R
State: Queensland

Re: GARY ............. Ream my Pipe !!!!!!!

Postby tape » Tue Aug 16, 2005 11:41 pm

red_dave wrote:
Pontikat wrote:Non PC Jokes willnot be condoned or frowned apon :roll:


are you then encouraging a public bagging of the Ronster?


Damn.... ya got in B4 me Dave..... 8)
Mick :drinkers:
If ya don't expect, ya don't get dissapointed.
http://www.insptag.com.au
User avatar
tape
Team Ninja
 
Posts: 1499
Joined: Tue Jul 06, 2004 7:09 pm
Location: Craigieburn, Melb. Vic
Bike: Other Kawi
State: Victoria

Re: GARY ............. Ream my Pipe !!!!!!!

Postby Smitty » Wed Aug 17, 2005 10:44 am

Pontikat wrote:PS Thanks Master Yoda, it seems I've been looking in the wrong shops.


Brett
in the past, I have also seen them at Blackwoods (+ AEBaker) stores
if that helps

cheers
GOTTA LUV the 12R!!
User avatar
Smitty
VIP MEMBER
VIP MEMBER
 
Posts: 10910
Joined: Wed Apr 21, 2004 1:59 pm
Location: 3rd rock from the Sun
Bike: ZX12R
State: Victoria

Re: GARY ............. Ream my Pipe !!!!!!!

Postby mfzx6r » Wed Aug 17, 2005 11:14 am

tape wrote:
red_dave wrote:
Pontikat wrote:Non PC Jokes willnot be condoned or frowned apon :roll:


are you then encouraging a public bagging of the Ronster?


Damn.... ya got in B4 me Dave..... 8)


Are you both trying to Hump Ron ??
Must be those pic's of his arse that Duane posted a while back .

Brett If you lived in Vic I could have helped you out :wink: but you dont :lol:


mario
Mario
'01 zx6r
klx300r
If it aint "Lime green" it must be a "Lemon"
Friends dont let friends ride Hondas


Image
The most famous KSRC member of all...
Part of the "Fookarwe" tribe
User avatar
mfzx6r
KSRC Addict
KSRC Addict
 
Posts: 3329
Joined: Thu Apr 22, 2004 8:36 am
Location: Lost :-) in melton VIC
Bike: Other Kawi
State: Victoria


Return to General Tech & Performance Talk

Who is online

Users browsing this forum: No registered users and 4 guests