GARY ............. Ream my Pipe !!!!!!!

[Nanna10r]

Got the Fzzr Zorst off atm, it all its neglected Glory. Been trying to buy a flexi Drive for my Die Grinder to fit a flap sanding wheel to & poke it down to remove all the internal surface rust/scale.
Any better ideas how to do this guys.

Non PC Jokes willnot be condoned or frowned apon

Cheers Brett

[HemiDuty]

How bout a honing tool, the ones that go on the end of a drill?

[mike-s]

what about a plastic dish scrubber thingo that's been retired from duty

just cut any pointy bendy bits off the plastic scrapey bit at the and you have plenty of plastic bristles left over to scrape a lot of the rust off.

Bonus is it'll get rid of a lot of the crap and scales before killing any burring wheels with the oxide

[Jonno]

Supercheap had a special on el-cheapo dremmel rotary tool which has a flex extension as part of the kit. $32 at the time. If you cant get one I will bring mine down thursday.

[MickLC]

heheh you could always stick your....

Non PC Jokes willnot be condoned or frowned apon

...bugger, nothing to see here, move along...

[Smitty]

Got the Fzzr Zorst off atm, it all its neglected Glory. Been trying to buy a flexi Drive for my Die Grinder to fit a flap sanding wheel to & poke it down to remove all the internal surface rust/scale.
Any better ideas how to do this guys.

Non PC Jokes willnot be condoned or frowned apon

Cheers Brett

easy peasy..this one
go to a tool store* and buy a LONG wire bottle brush
called a stove pipe cleaner
they come with a long twisted wire handle..about a metre long
and the diameter of the brush..your choice from 1" up to
about 6"
jam it up the zorst and twist
and you are done!

*(not Bunnings or Supercheap but Alltools or similar)

hth

cheers

[red_dave]

Non PC Jokes willnot be condoned or frowned apon

are you then encouraging a public bagging of the Ronster?

[Nanna10r]

Non PC Jokes willnot be condoned or frowned apon

are you then encouraging a public bagging of the Ronster?

GO HARD DAVE5, i did leave it open ended for you's all.

Cheers Brett

PS Thanks Master Yoda, it seems I've been looking in the wrong shops.

[tape]

Non PC Jokes willnot be condoned or frowned apon

are you then encouraging a public bagging of the Ronster?

Damn.... ya got in B4 me Dave.....

[Smitty]

PS Thanks Master Yoda, it seems I've been looking in the wrong shops.

Brett
in the past, I have also seen them at Blackwoods (+ AEBaker) stores
if that helps

cheers

[mfzx6r]

Non PC Jokes willnot be condoned or frowned apon

are you then encouraging a public bagging of the Ronster?

Damn.... ya got in B4 me Dave.....

Are you both trying to Hump Ron ??
Must be those pic's of his arse that Duane posted a while back .

Brett If you lived in Vic I could have helped you out but you dont


mario