Routine Maintenance!!

For general Technical and Performance Discussions

Routine Maintenance!!

Postby Yankee » Wed Mar 30, 2005 1:03 pm

who is THE MAN?!!!

that's right......

well, i woke up early this morning, took the bike apart to millions of pieces (okay, thousands?) and let every liquid in it drain out while i went to the local kwaka dealership! (uh, minus the battery water! :lol: )
anyway, one K&N air filter, 4 liters of motul 3000+ (what i had in it before :roll: ), a hi-flow oil filter, four NGK CR9E "IX" spark plugs, and lotsa "inspecting" (fuel filter, fork seals, compression tests, etc...) LATER, that tremendous sense of accomplishment is ALL MINE!! and boy does my baby PUUURRRRRRRRrr now!! (just couldn't do the damn "shims", not game for that one!)
anywho, just wanted to brag and tell others to do the same thing to their loved ones..... it makes you and the bike feel better for it. (not your thumbs, as those damned stick coils are a bitch to pull out and put back in!!!)

anyone else do their own maintenance? only hiccup was that at one point i dropped the damn spark plug socket into the pan of used oil... lovely. move that next time......
OH, and the BESTEST part?..... $182= DONE! (and five hours of my own labor! but i clean as i go and baby the bike, unlike the "local" dude would do)
oh, and i didn't take pics... come on, it already took me 5-ish hours as it was!!!
cheers all
Image
Yankee
Team Ninja
 
Posts: 858
Joined: Fri Nov 05, 2004 9:17 pm
Location: SEQ 4000

re: Routine Maintenance!!

Postby ttc » Wed Mar 30, 2005 1:04 pm

Well done Yankee :)

id you remember to change the headlight fluid as well? :P
Image
User avatar
ttc
Team Black
 
Posts: 2893
Joined: Fri Nov 19, 2004 2:59 pm
Location: Brisbane
Bike: Z1000
State: Queensland

re: Routine Maintenance!!

Postby mrmina » Wed Mar 30, 2005 1:09 pm

good stuff mate.

lets put it this way, if u want something done right u gotta do it urself.
[url]www.rmsmg.com.au
mrmina
Apprentice Post Whore :-)
Apprentice Post Whore :-)
 
Posts: 7039
Joined: Wed Apr 21, 2004 8:11 pm
Location: Sydenham, Victoria

re: Routine Maintenance!!

Postby RG » Wed Mar 30, 2005 1:27 pm

When are u free to do mine for me? :lol:
"...The credit belongs to the man who is actually in the arena." - Theodore Roosevelt
RG
KSRC Contributor
KSRC Contributor
 
Posts: 1454
Joined: Tue Nov 30, 2004 11:28 pm
Location: WA
Bike: It's not worth Mentioning
State: Western Australia

re: Routine Maintenance!!

Postby javaman » Wed Mar 30, 2005 1:30 pm

Yankee, my bike is up for servicing and about to do so.... just been very lazzzzy lately ...
alien.gif andi - Red GPZ900R, GPZ750R1, KLR650 Tengai, KLR250
"my dad's motorbike is cool it is all ways clean.oheter pepole' s motorbikes
are't like my dad's one it's because their is one not always clean."
-ariel circa 2007
http://GPZninja.blogspot.com/
User avatar
javaman
VIP MEMBER
VIP MEMBER
 
Posts: 2473
Joined: Sun Nov 21, 2004 8:39 pm
Location: Bonbeach, VIC
Bike: GPz900
State: Victoria

re: Routine Maintenance!!

Postby MickLC » Wed Mar 30, 2005 1:50 pm

It's definitely worth doing yourself, and you get to know your bike better too...well done mate.
'13 Z1000, '76 Z650+,'91 KLR250, '95 ZX6R Racebike
User avatar
MickLC
Team Crim
 
Posts: 5429
Joined: Wed Apr 21, 2004 1:04 pm
Bike: Z1000
State: ACT

re: Routine Maintenance!!

Postby Yankee » Wed Mar 30, 2005 1:52 pm

java! that reminds me!
when i went down to the kwak joint, i asked them about the "resonator", and i really do trust the guy out in the shop... anyway, he explained it and said that they were there for a reason..... at warp factor 6+, with a LOT of air being gulped down, the resonators help it be utilized and not OVERDONE... basically, he said don't take them out cuz you'll jack up your top end response! :shock: cuz i was gunna do the milk bottle cap thing :wink: but, decided against it! (btw, your pics outta the manual sure do make those things looks small, when they are HUGE!)
Image
Yankee
Team Ninja
 
Posts: 858
Joined: Fri Nov 05, 2004 9:17 pm
Location: SEQ 4000

Re: re: Routine Maintenance!!

Postby javaman » Wed Mar 30, 2005 3:18 pm

Yankee wrote:java! that reminds me!
when i went down to the kwak joint, i asked them about the "resonator", and i really do trust the guy out in the shop... anyway, he explained it and said that they were there for a reason..... at warp factor 6+, with a LOT of air being gulped down, the resonators help it be utilized and not OVERDONE... basically, he said don't take them out cuz you'll jack up your top end response! :shock: cuz i was gunna do the milk bottle cap thing :wink: but, decided against it! (btw, your pics outta the manual sure do make those things looks small, when they are HUGE!)


If that's the case wouldn't Kawasaki make them permanent instead of pieces of bottles you can just pull out :? I still reckon it's there to control "noise". Very common thing these resonators are, even in cars.
alien.gif andi - Red GPZ900R, GPZ750R1, KLR650 Tengai, KLR250
"my dad's motorbike is cool it is all ways clean.oheter pepole' s motorbikes
are't like my dad's one it's because their is one not always clean."
-ariel circa 2007
http://GPZninja.blogspot.com/
User avatar
javaman
VIP MEMBER
VIP MEMBER
 
Posts: 2473
Joined: Sun Nov 21, 2004 8:39 pm
Location: Bonbeach, VIC
Bike: GPz900
State: Victoria

re: Routine Maintenance!!

Postby Nanna10r » Wed Mar 30, 2005 3:37 pm

Onya Lurpee. Next stop a chain n sprockets :twisted:
Cheers Brett
"Nan & Pop Racing"
Poppy Hops on .... CBR150 (Superlite) CBR954 "Blade"
Nanna Naps on .... MoriWAKI NSR85 (Motolite) ZX10R "Crim"
We may ride like Old Can'ts, But Phuk we look DOOG !!!!!!
User avatar
Nanna10r
Team Ninja
 
Posts: 4291
Joined: Wed Jul 14, 2004 10:42 pm
Location: Brisbane Australia
Bike: ZX10R
State: Queensland

Re: re: Routine Maintenance!!

Postby Aussie Ninja » Wed Mar 30, 2005 6:27 pm

mrmina wrote:good stuff mate.

lets put it this way, if u want something done right u gotta do it urself.


Yup. I just got my shims done because I have no idea how to do it myself and got my bike back with scratches on the frame and the tank bolts finger tight. Not happy Jan. :evil:

Well Done Yankee. :)
Real bravery is being afraid but doing it anyway.
1998 ZX6R R.I.P.
2004 ZX10R killed by Roo.
2011 ZX10R
User avatar
Aussie Ninja
KSRC Regular
KSRC Regular
 
Posts: 833
Joined: Mon Nov 15, 2004 8:00 am
Location: Eastern Creek
Bike: ZX10R
State: New South Wales

re: Routine Maintenance!!

Postby Yankee » Thu Mar 31, 2005 9:22 am

cheers all!!!!
yeah, that is the EXACT reason that i really did this one myself...... last time i took it somewhere, i doubt that they did half the shit i paid for and i found the fairings not put on correctly as well as a loose tank as well!!!
HOW HARD IS IT??? to actually "care" for customers bikes????
oh well, i know exactly what I did to it and EXACTLY what i put into it, and i didn't scratch shit!!!
brett, the sprockets and chain are good for another million miles (i hope) so won't be for a while.... thank god!!! altho, i would like that paddock stand at the shop to do chain maintenance!!!
Image
Yankee
Team Ninja
 
Posts: 858
Joined: Fri Nov 05, 2004 9:17 pm
Location: SEQ 4000

Re: re: Routine Maintenance!!

Postby Steve_TLS » Thu Mar 31, 2005 9:58 pm

tanyathecheeky wrote:Well done Yankee :)

id you remember to change the headlight fluid as well? :P


Only use the halogen stuff though, it's the best. It's not so good as a blinker replacement fluid though.

--------

Good Job on the maintenance. Your wallet and bike will thank you.
Steve
"I spent most of my money on Scotch, women and cigarettes. The rest I just wasted"
-My TLS pages- -My GSXR pages- -My Blog-
User avatar
Steve_TLS
KSRC Member
KSRC Member
 
Posts: 328
Joined: Sat Mar 12, 2005 12:10 pm
Location: Bacchus Marsh, Vic
Bike: Scooter
State: Victoria

re: Routine Maintenance!!

Postby YAPPA » Tue Apr 19, 2005 6:44 pm

good 2 c u didn't use leaded oil marty................bwahahahahahahahahah, sorry m8 couldn't resist
Image
YAPPA
KSRC Regular
KSRC Regular
 
Posts: 928
Joined: Wed Sep 08, 2004 8:30 pm
Location: BRISSY
Bike: ZX6R
State: Queensland

re: Routine Maintenance!!

Postby Damon Z1000 » Tue Apr 19, 2005 9:24 pm

Well done bud, gives you a good feeling when all goes well.
Mate if you can spare the time, I don't think there's anything better to take your mind off stuff than tinkering with the bike.
Again, well done
User avatar
Damon Z1000
KSRC Contributor
KSRC Contributor
 
Posts: 1617
Joined: Sun Oct 10, 2004 4:13 pm
Location: Bligh Park NSW
Bike: Z1000
State: New South Wales

re: Routine Maintenance!!

Postby Jonno » Wed Apr 20, 2005 9:56 am

Good stuff Marty, when you are up this way again you can service and polish mine. The bike that is. :P Then ya might understand the guys at the shop getting a little lazy after doing 10 a day. The local dealer here did a fantastic job on mine last service, everything had been done perfectly and he had cleaned it like it was new :shock: $280 6k service.
User avatar
Jonno
Mobile Chicane
 
Posts: 5613
Joined: Thu Dec 30, 2004 4:10 pm
Location: Brisbane
Bike: Other Kawi
State: Queensland

Next

Return to General Tech & Performance Talk

Who is online

Users browsing this forum: No registered users and 7 guests